Have a Question? Contact Us

888-462-7828 Live Chat

Sound Devices A10-RACK - Rack Mount Chassis for Slot-In Receivers

  • Dale #:

    SODE-A10RACK
  • Availability:

    Not in Stock - Reserve Yours
  • This item is not in stock and needs to be ordered from the manufacturer. Your payment will be charged after completing checkout. We will strive to ship as soon as possible, pending availability.

Description

The A10-RACK offers convenient mounting, powering, RF, and audio connectivity for four uni- or SuperSlot wireless receivers in its 1 RU chassis. It is designed for dual-channel receivers from Audio Limited, including the A10-RX, plus slot receivers from Lectrosonics and Wisycom. The A10-RACK incl... Read More

Free Shipping (Continental US)

Have a Question?

Call Toll Free: 888-462-7828 Live Chat Email Us

Suggested Accessories

Description

The A10-RACK offers convenient mounting, powering, RF, and audio connectivity for four uni- or SuperSlot wireless receivers in its 1 RU chassis. It is designed for dual-channel receivers from Audio Limited, including the A10-RX, plus slot receivers from Lectrosonics and Wisycom. The A10-RACK includes built-in antenna distribution with powering for active antennas. Up to eight channels of audio from single or dual-channel receivers appear on both its XLR outputs and over Dante™ audio-over-Ethernet.

Features:

  • accepts up to four, two-channel wireless receivers (receivers sold separately)
  • audio output on analogue/AES3 and Dante
  • built-in power distribution
  • built-in antenna distribution with selectable power for active antennas
  • powered from 4-pin XLR input (10-18 VDC)
  • USB port for firmware updates and serial access


Dante™ audio networking offers the convenience of a single CAT5 Ethernet connection to carry the audio signal from the eight channels of the A10-RACK. Dante is alway active, whether the receiver is set for analogue or AES digital output. When used with other Dante-compatible devices, complex systems with comprehensive routing can be built. Monitoring and routing of signals from transmitters to receivers is simplified with Dante Controller, a free software application from Audinate.

RF Distribution
The A10-RACK has an integrated RF distribution amplifier. Its two RF inputs offer selectable 12 V powering for active antennas, plus loop-thru connections for another A10-RACK. A single pair of antennas can be used for up to 16 audio channels.

Powering
The A10-RACK is powered from standard 4-pin XLR, 10-18 VDC power supplies, such as Sound Devices XL-WP4 (shown right). Power supplies require 3 amps (minimum) for proper powering of the A10-RACK and connected slot receivers.

More +

Product Specs

Compatible Receivers Audio Ltd. A10-RX with A-SL
Audio Ltd. En2 CX2-P
Lectrosonics SRa
Lectrosonics SRb
Lectrosonics SRc
Sony DWR-S03D
Wisycom MCR42
Frequency Range 470-694 MHz
Number of Receivers Four two-channel, diversity receivers
Active Distribution Amplifier Bandwitdth 224 MHz, with powering for active antennas (12 V, 200 mA)
Antenna Inputs 2 x BNC 50 Ohms
RF Outputs 2 x BNC 50 Ohms
Power 10–18 Volts DC, 3 amps via 4-pin XLR male
Audio Outputs 8 x 3 pin XLR-M (analog and/or AES3)
Dante Output 2 x RJ45 to provide Dante™ primary and secondary
Analog Output +18 dBu maximum, balanced
Digital Output AES3, transformer-balanced
Audio Frequency Response 20-20,000 Hz ±1 dB
Service Port USB-B
Dimensions (H x W x D) 442 mm x 210 mm x 45 mm (without rack ears)
17.4 x 8.3 x 1.8 in (without rack ears)
1 RU
Weight 7.9 lbs (without receivers)
3.6 kg (without receivers)

More +

Shipping Rate Calculator

 

Also Popular