Have a Question? Contact Us

888-462-7828 Live Chat

SPL Phonitor 2 120V Rail Headphone Monitoring Amplifier (Silver)

 
  • Dale #:

    SPL-1281
  • Availability:

    Not in Stock - Reserve Yours
  • This item is not in stock, but we can usually ship it within 10-20 days after your order is placed. Your payment will be charged after completing checkout.

Description

Phonitor 2 is the ultimate headphone amplifier for sound and mastering engineers who also mix and master on headphones. Speakers can also be connected, making Phonitor 2 a full-fledged monitor controller. Milled from the solid aluminum is the 45mm large volume knob. Its mass in combination with ... Read More

Free Shipping (Continental US)

Have a Question?

Call Toll Free: 888-462-7828 Live Chat Email Us

Suggested Accessories

Description

Phonitor 2 is the ultimate headphone amplifier for sound and mastering engineers who also mix and master on headphones. Speakers can also be connected, making Phonitor 2 a full-fledged monitor controller.

Milled from the solid aluminum is the 45mm large volume knob. Its mass in combination with the motorized Alps RK27 Big Blue potentiometer further enhances the "spoon in honey" turning feeling.

Remote control
The volume can be adjusted with any infrared remote control, which Phonitor 2 simply learns.

Just press the IR programming button on the back and then the buttons for louder and softer.

Learning made easy
This video explains how you can use any infrared remote control to remotely control the volume.

Monitor Controller Features

  • Sources: 2x XLR, 1x RCA
  • Solo L/R
  • Phase reversal for L and R
  • Output switchable to headphones or speakers
  • Mute
  • Phonitor Matrix with crossfeed, speaker angle and center level (the latter can be switched off)

Speaker Output
To The Power Amp or to the active loudspeakers it goes symmetrically via XLR sockets.

Slave Thru
The volume control can be switched off by means of a dip-switch on the bottom of the unit.

The Sources
Two balanced and one unbalanced stereo sources can be connected to Phonitor 2.

If a CD player or other HiFi equipment is connected to the RCA jacks, the consumer level can be raised from -10 dBV to 0 dBu using a dip switch on the bottom of the unit. In this way the sources are comparable in level.

Mechanical VU Meter
Visualize the input levels, which can be switched in sensitivity with the VU Cal switch.

Laterality
By its very nature, hearing can be directed more to the left or more to the right. This is particularly evident when listening with headphones.

That’s why Phonitor 2 has the finely resolved Laterality control. With it the center can be set perfectly.

The Revolution in the headphone amplifier is the Phonitor Matrix, thanks to which you can create and evaluate your production through headphones in the same way as through speakers.

To achieve this, the super stereo effect must be corrected. It makes the placement of voices and instruments in the stereo image appear to be more widely distributed and effects like reverb and delays are overdone.

More +

Product Specs

Inputs XLR connectors, electronically balanced
Impedance: bal. ca. 20kOhm, unbal. ca. 10kOhm
Max. Input Level: +32.5dBu
Monitor/Line Outputs XLR connectors, electronically balanced
Frequency Range: 4Hz to 480kHz (-3dB)
CMR: -82dBu (at 1kHz, 0dBu input level and unity gain)
Crosstalk at 1kHz: -106dB
THD&N: 0.00085% (at 0dBu input level and unity gain, 1kHz, 100kOhm load)
Noise: Unweighted -101.87 dB; A-weighted -104.76dB; CCIR: -96.1dB
Dynamic Range: 134.37dB
Headphone Output 6,3-mm TRS connector
Pin wiring: Tip = Left, Ring = Right, Sleeve = GND
Impedance: 0,18Ohm
Attenuation Factor: 180@40Ohm
Frequency Range: 10Hz to ›480kHz ( -3dB)
CMR: -106dBu (at 1kHz, 0dBu input level and unity gain)
Crosstalk at 1kHz: -106dB
THD&N: 0.00091% (at 0dBu input level and unity gain, 1kHz, 100kOhm load)
At 0dBu input level and unity gain
Noise: Unweighted -101.12dBu; A-weighted -103.98dBu, CCIR -95.02dBu
Dynamic Range: 133.62dB
Power Amplifier Max. Output Power:
2 x 1W (+30dBu) at 1kHz and 600Ohm connected impedance
2 x 2W (+30dBu) at 1kHz and 300Ohm connected impedance
Power Supply Voltages: 230V AC, 50Hz / 120V AC, 60Hz
Power Consumption: max 23.7VA
Fuses: 100-120V AC: T 1A/200-240V AC: T 630mA
Dimensions & Weight H x W x D: 88 x 276 x 305mm; 19" x 10.9" x 12"
Weight: 4.3kg; 9,5lbs

More +

Shipping Rate Calculator

 

Also Popular