SSL X-Rack Channel Equalizer Module

 

Have a Question? Call Toll Free: 888-462-7828

Live Chat Email Us
Dale #:SSL-729625X1

Availability: Usually ships in 5 - 10 Days

This item usually ships within 5-10 days after your order is placed. Your payment will be charged after completing checkout.
Free Shipping (Continental US)
  • The X-Rack Channel EQ Module from Solid State Logic is a modular EQ strip for the X-Rack. It brings the legendary SSL twin-curve E and G series EQ to the studio that does not need a large console, as well as high-end EQ to the project studio.

    The module provides four-bands of EQ, with the low-mid and high-mid frequencies being fully-parametric with variable "Q", and the high- and low-frequency bands featuring shelf/bell control. The module input and output gains can be set to operate at a nominal level of either +4dBu or -10dBV, using a switch on the connector panel.

    Features:

    • EQ module that delivers twin-curve E and G series EQ, derived from the legendary SSL large-format consoles
    • The G-EQ button switches the EQ from "E" operation to "G" operation
    • Global by-pass button
    • The high-frequency and low-frequency sections provide shelving equalizers with variable turnover frequency and a gentle slope.
    • Selecting the G-EQ button provides a slightly steeper slope for both sections with a degree of overshoot/undershoot
    • At any Q setting, the bandwidth of the high-mid and low-mid frequency sections vary with gain, with an increase in boost or cut increasing the selectivity of the EQ
  • Filter TypeParametric and shelving
    Number of ChannelsSingle
    Inputs 1 x XLR
    Outputs1 x XLR
    Maximum Input LevelNot specified by manufacturer
    Frequency BandsHF Shelving: 1.5kHz to 22kHz, variable
    LF Shelving: 40Hz to 600Hz, variable
    HMF Parametric: 600Hz to 7kHz, variable
    LMF Parametric: 200Hz to 2.5kHz, variable
    BandwidthHF Shelving: Q = 2.5
    LF Shelving: Q = 2.5
    HMF Parametric: Q = variable from 0.5 to 2.5 (may also vary with gain)
    LMF Parametric: Q = variable from 0.5 to 2.5 (may also vary with gain)
    Range (Boost/Cut)HF, HMF and LMF: +/-20dB
    LF: +/-16.5dB
    Maximum Output Level+26dBu
    Frequency Response20Hz to 20kHz, +/-0.5dB (-3dB at 200kHz)
    Dynamic RangeNot specified by manufacturer
    Noise<-83dBu (+4dBu operating level)
    Dimensions (WxDxH)1.4 x 7.9 x 6.75" (35 x 200 x 171mm)
    Weight9.5 oz (260 g)
    SpecialtiesThe LF and HF bands have variable turnover frequency with switchable bell/shelving and selectable response curves
  • Shipping rates calculator