Symetrix AirTools 2x Broadcast Voice Processor

 

Have a Question? Call Toll Free: 888-462-7828

Live Chat Email Us
Dale #:SYME-800026

Availability: Usually ships in 5 - 10 Days

This item usually ships within 5-10 days after your order is placed. Your payment will be charged after completing checkout.
Free Shipping (Continental US)
  • The microphone is a crucial link to the audience. Proper management of that link is essential. Enter the AirTools Voice Processor 2x, an outstanding programmable microphone processor that is flexible, powerful, and easy to use.

    Chief Engineers treasure its programmability and rich DSP feature set. On-air talent enjoy its simplicity of operation. Studio managers appreciate how it independently processes two microphone channels in one rack space. And, most importantly, everyone loves the sound – including the listening audience.

    Features:

    • Two (2) independently programmable channels of ultra-low latency digital microphone processing in one rack space.
    • Two (2) Mic/Line inputs, two (2) Mic/Line outputs, two (2) AES3 outputs, Word Clock input.
    • Processing modules include Compression, Equalization, De-Essing, Downward Expansion, Highpass and Lowpass filters, and Voice Symmetry.
    • Configure named presets for each on-air personality – up to 50, including factory presets – using the included Windows® software over Ethernet.
    • Recall presets with convenient front panel controls, optional hardware remote(s), or third-party control protocol.

    The 2x offers a comprehensive set of voice enhancement tools for any situation. The 2x’s Windows® software application enables total control of all essential parameters. Once a desired sound is dialed in, all settings are saved as named presets for later recall from the front panel or remotely. Any mic can be optimized for a diverse air staff with either male or female voices.

    The Symetrix Voice Processor legacy began with the original model 528, and has continued through the 601, 528E, 628 and 6200. Now you can maintain quality assurance throughout your voice talent signal chains with the AirTools Voice Processor 2x, Engineered by Symetrix - a name that has become synonymous with high quality audio processing for over 30 years.

  • Inputs  
    Nominal Input Level +4 dBu or -10 dBV line level, to -50 dBu mic level (software selectable) with 20 dB of headroom.
    Maximum Input Level +23 dBu.
    Input Impedance 6.67 kΩ balanced, > 3.3 kΩ unbalanced
    CMRR > 75 dB @ 1 kHz, unity gain.
    Mic Pre-amp EIN > -127 dB, 22 Hz - 22 kHz, 100 Ω source impedance.
    Phantom Power +48 VDC.
    A/D Conversion 24-bit delta/sigma.
    A/D Dynamic Range 116 dB (A-Weighted).
    A/D THD+Noise -102 dB (un-weighted); 1 kHz @ -2 dBFS with 0 dB gain.
    A/D Latency 0.25 mS.
    System  
    Nominal Sampling Rate 48 kHz.
    Word Clock Input Range 22 - 192 KHz
    A/D/A Frequency Response 20 Hz - 20 kHz, +/- 0.25 dB.
    A/D/A Dynamic Range 113 dB (A-Weighted).
    A/D/A Latency < 0.7 mS; with all DSP active.
    Interchannel Crosstalk -90 dB @ 1 kHz, typical.
    Outputs  
    Nominal Output Level Analog +4 dBu line level with 20 dB of headroom.
    Nominal Output Level Digital -20 dBFS. For unbalanced analog output, float (do not connect) the minus output terminal. Unbalanced usage results in 6 dB lower output level.
    Maximum Output Level Analog +24 dBu. Digital: 0 dBFS.
    Output Impedance Analog 200 Ω balanced, 100 Ω unbalanced. Digital: 110 Ω.
    D/A Conversion 24-bit delta/sigma.
    D/A Dynamic Range 114 dB (A-Weighted).
    D/A THD+N -98 dB (un-weighted); 1 kHz @ -2 dBFS.
    D/A Latency 0.2 mS.
    Mic Level Output Pad (Internal) -42 dB.
    Mechanical Data  
    Space Required 1U (WDH: 48.02 cm x 23.11 cm x 4.37 cm / 18.91 in x 9.1 in x 1.72 in), depth is specified from front panel to back of connectors. Allow at least 3 inches additional clearance for rear panel connections. Additional depth may be required depending upon your specific wiring and connections.
    Electrical 100-240 VAC, 50/60 Hz, 25 Watts maximum. No line voltage switching required.
    Ventilation Maximum recommended ambient operating temperature is 30 C / 86 F. Ensure that the left and right equipment sides are unobstructed (5.08 cm, 2 in minimum clearance). The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc.
    Certifications UL 60065, cUL 60065, IEC 60065, EN 55103-1, EN 55103-2, FCC Part 15, RoHS.
    Weight 8 lbs. (3.60 kg).
  • Shipping rates calculator