Have a Question? Contact Us

888-462-7828 Live Chat

Wisycom MFL Bundle - RF Over Fiber Distribution System

 
  • Dale #:

    WISY-MFLBUNDLE
  • Availability:

    Not in Stock - Reserve Yours
  • This item is not in stock and needs to be ordered from the manufacturer. Your payment will be charged after completing checkout. We will strive to ship as soon as possible, pending availability.

Description

Mating pair of Stock MFL fiber links. Loaded with 6 Channel Mux, RF filter set for USA, and 12V DC option. Bundle Includes: 1 MFL-TTRR-DC-OMS-F42 1 MFL-RRTT-DC-OMS-F42. MFL provides wideband optical link for up to 4 RF channels combined in a single fiber thanks to CWDM technology. It is desig... Read More

Shipping Charges Apply

Have a Question?

Call Toll Free: 888-462-7828 Live Chat Email Us

Suggested Accessories

Description

Mating pair of Stock MFL fiber links. Loaded with 6 Channel Mux, RF filter set for USA, and 12V DC option. Bundle Includes: 1 MFL-TTRR-DC-OMS-F42 1 MFL-RRTT-DC-OMS-F42.

MFL provides wideband optical link for up to 4 RF channels combined in a single fiber thanks to CWDM technology.
It is designed to allow for a flexible and modular configuration thanks to a mainboard that can be fitted with up to 4 plug-in boards that can be any combination of two types:
• TX: Laser optical transmitter (CDWM) plug-in board
• RX: Optical-receiver plug-in board

Other configurations are also possible like MFL-RR** / MFL-TT** or a mixed like a MFL-RRTT with both receiver and transmitter channels.

Features:

  • REAL-TIME CLOCK with a backed-up static RAM to monitor and record internal RF levels and service data (i.e. laser lifetime)
  • TX – (remote RF reception, i.e. diversity antennas): the units can incorporate a digitally tuned filter (25 MHz movable band over 400-800 MHz)
  • TX – it can route RF through an external filter or to additional receiver (redundancy) to easily implement a failsafe configuration that can switch on a redundant receiver or transmitter if any fault is detected
  • TX – It automatically monitors RF levels and intervenes to avoid fiber saturation
  • RX – (RF transmission, i.e. single-frequency master/slave areas)
  • RX – It can route an IFB high power signal to transmit locally and send low power IFB carrier over fiber to slave units
  • RX – When it is working along with a MTK952MS in slave configuration, the fiber loss is automatically recovered and the units increase the gain so that the transmitter power equals the target level (measured with an power/SWR meter integrated into the MTK952MS)

More +

Product Specs

MAINFRAME
RF to Optical modules (TX module) 1 to 4
Optical to RF modules (RX module) 1 to 4
Maximum number of modules 4
RF to fiber link working modes ANT, IFB, 4ifb, 3ifb, 2ifb, 1ifb
Rear optical connectors 4 SC/APC, 1 LC/PC duplex, other type on request
Internal optical CWDM MUX/DEMUX 2 max (option OMS or OMX)
“ANT” MODE – OPTICAL TX MODULE
Typical application RX antenna remoting
Frequency ranges (front panel selectable) 140 to 960 MHz (flat)
470 to 960 MHz
25MHz BW tunable band-pass filter 404-788MHz (BF1)
40MHz BW tunable band-pass filter 430-730MHz (F41/F42/F45)
940-960MHz (F42/F45)
806-810MHz (F45)
Other selectable filters (see section Filter option)
External user band-pass filter
External filter loss compensation 0 to 6 dB
TX Gain 0dB (user adjustable +6 to -20dB typ.)
Input IP3 > 16 dBm typ.
Noise figure < 20dB typ. (*)
SFDR > 116 dB/Hz 2/3 typ.
RF input connector N female 50 Ω
Antenna booster supply 12Vdc 200mA max
External filter connectors BNC female 50 Ω
“ANT” MODE – OPTICAL RX MODULE
RX Gain 0dB (user adjustable ± 14dB typ.)
Failsafe option yes, standard option
RF output connector N female 50 Ω
Failsafe connector BNC female 50 Ω
“IFB” MODE – OPTICAL TX MODULE
Typical application “IFB” signal remoting (isofrequency systems)
Frequency range 140 to 960 MHz
RF input level - 6 to 6 dBm [0.25mW to 4mW]
RF input level for 0dBm out (@ 0dB gain) from -3dBm to + 10dBm
RF input connector N female 50 Ω
“IFB” MODE – OPTICAL RX MODULE
RX output level 0 dBm (user adjustable +6 to -20dB typ.)
Failsafe option yes, standard option
RF output connector N female 50 Ω
DC power for external amplifier 12V@ 200mA
Failsafe connector BNC female 50 Ω
OPTICAL TX MODULE
Optical power 6dBm [4mW] (other on request)
Wavelengths 1511 or 1531 or 1551 or 1571 nm
Laser low noise, low distortion DFB laser
OPTICAL RX MODULE
Input optical power range -5 dBm to 5 dBm [0.3mW to 3mW]
Wavelengths 1490 to 1610 nm
PHYSICAL
Temperature range -20 to +55 °C
Powering 90 to 240 Vac, 60VA max
10-28Vdc 5A frame floating (OPTINAL)
Dimensions 19”/1U, 430x44x370mm (Width x Height x Depth)
Weight 4,5 kg

More +

Shipping Rate Calculator

 

Also Popular