Have a Question? Contact Us

888-462-7828 Live Chat

Glensound INFERNO - Commentator's Console with Dante Connectivity

 
  • Dale #:

    GLEN-INFERNO
  • Availability:

    In Stock
  • Available for immediate shipment or pick-up from our Jamaica, NY warehouse. In-store pick-up is available Monday through Friday 8:30 am to 5:30 pm.

Description

Links To Dante Compatible Network Or DARK88 Break Out Box Inferno can be used on it's own when connected to a Dante audio network. Many audio routers, consoles and intercom systems are Dante compatible, and will accept the Inferno link, enabling Glensound grade commentary into the audio network. ... Read More

Shipping Charges Apply

Have a Question?

Call Toll Free: 888-462-7828 Live Chat Email Us

Suggested Accessories

Description

Links To Dante Compatible Network Or DARK88 Break Out Box
Inferno can be used on it's own when connected to a Dante audio network. Many audio routers, consoles and intercom systems are Dante compatible, and will accept the Inferno link, enabling Glensound grade commentary into the audio network.

There are primary and secondary Dante network connections.

Features:

  • Single user Dante commentary box
  • System is scalable with multiple commentators as part of a Dante network
  • Can connect to any Dante compatible network or directly to our DARKxx units.
  • Single mic/line/48v input with Referee compressor/limiter
  • Headphone mixer has 7 inputs supplied from the Dante network, plus the local input (sidetone)
  • Each headphone input has left/both/right headphone switching 
  • 7 talkback circuits are programmable via the Dante network
  • Browser based remote control of input gain and switching functions
  • PoE, Mains or DC powering options 


Inferno can also be used outside of a dedicated Dante network when connected to one of the DARKxx or AoIP44 break out boxes. This connection can be direct or across a structured network. The DARKxx or AoIP44 units allows all of the audio inputs and outputs to be located in a separate location to the Inferno.

Programmable On A Dante Audio Network
When connected to a Dante network, sources and destinations can be configured from any part of the network using the free Dante controller software. Details are available at www.audinate.com

Seven Talkback Circuits
The seven illuminated talkback buttons route the audio input to 7 different destinations and remove the audio from the main programme output.

Eight Input Headphone Mixer
Seven external sources plus sidetone are presented on eight level controls allowing the user to create their own required monitoring mix of all sources. Each input can be independently selected to be on the users left ear, right ear or both ears. The headphone connection is available on a 3.5mm and a 6.35mm jack socket.

Single Input
The single input is switchable on the rear panel to be line/mic/48v and has adjustable input gain. The input also features Glensound's Referee compressor limiter system. This applies a variable rate compressor to the input peaks so that no clipping occurs, without affecting the rest of the audio signal.

Remote Control
The Inferno contains a web server, allowing remote functionality to an engineer from any PC connected to the network via any web browser.  Enter the IP address of the Inferno in the browser for remote control of the front end mic gain.  It also allows configuration of each push button on the unit to be on/off latching, momentary (push to talk), always on, and off when pushed (cough), or in an intelligent mode where a short press latches or a longer press is just momentary.

15 segment LED PPM Meter 
Audio input level is indicated on the 15 segment PPM meter.

Power On Dante Link Or Locally
Inferno can be powered via the network audio connection if it conforms to the PoE standard. There is also an internal 100v-240v mains supply.

Scaleable Commentary

  • Start with one Inferno into a Dante network
  • Add Multiple Inferno at any time for 2, 3, 4 ,5 or more commentator system
  • Use the DARKxx units for a simple point to point networked audio break out box

More +

Product Specs

AUDIO INPUT  
Input Type Neutrik 3 pin XLR
Input Impedance Mic: 2k4 ohms
Line 100k ohms
Equivalent Input Noise 127dBu (22Hz-22KHz) RMS A weighted Terminated with 300 Ohms)
Frequency response Mic -2dBu @25Hz flat @50Hz till 22kHz (+/- 0.25dBu).
Line flat till 22kHz
Distortion at +8dBu 100Hz = 0.023%
1kHz =0.012%
10kHz = 0.014%
Line Up Gains Dynamic Mic: 58dB
Mic + Phantom Power: 35dB
Line: 0dB
Gain Range Mic: -30 to +15dB
Line: +/-15dB
Max Input Before Clipping (@line up) Dynamic Mic: +10dBU,
Mic+phantom: +18dBu
Line: +18dBu
HEADPHONES  
Headphone Impedance 16-1000 ohm (auto output level to match impedance)
Headphone Noise -76.6dB @ line up (residual noise)
Headphone Frequency Response >-0.1dB 22Hz to 22kHz
Headphone THD + Noise (Ref +8dB) 0.008% @ 1kHz
Connection 6.35mm & 3.5mm stereo jack plugs
Headphone Volume Pot Range +10dB to Off (can be configured +10dB to -30dB)
Maximum Headphone Output +16.8dB into 600 Ohms
DANTE/AES67 NETWORK INTERFACE  
Physical 2 x Neutrik Ethercons Cat6 RJ45s & 2 x SFP slots
Type Fully redundant Primary & secondary circuits
Sample Frequency 48K
Resolution 24 Bit
Control & Routing Via Free Dante Controller
AES67 Can be configured for AES67
POWER  
Mains 1 x Filtered IEC, 100 to 240VAC (+/-10%) 47-63Hz
PoE Can be powered by PoE on either Copper network interface
DC Input 2.5mm Barrel, Centre +Ve, 9 - 15 Volts
Consumption Front Panel Power On LED: Bright Blue
Rear Panel Power On Indicators: 1 green LED showing presence of each of the above power sources
PHYSICAL  
Size 137 x 210 x 86mm (WxDxH)
Weight 1.25Kg
Mechanics All aluminium construction, anodised and laser etched, powder coated sides
Shipping Carton Rugged Export Quality cardboard carton 610 x 420 x 170mm (WxDxH)
INCLUDED ITEMS  
Handbook Physical A4 (Soft copy can be downloaded)
Mains Cable UK & EU only, 2 metre mains plug to IEC
RJ45 Network Cable 1 off 2 Metre
OPTIONAL ITEMS  
Carrying Case Polypropylene Carrying Case
SFP Fibre Modules Multi Mode, Single Mode and Bi-directional on single Fibre available
External DC Power Supply Switch mode (100 - 250VAC) desktop style with IEC mains input & 1.5 metre DC output cable

More +

Shipping Rate Calculator

 

Also Popular