Whirlwind ISO1 Line Isolator and Hum Remover

The ISO1 is a one channel transformer isolation box and line balancer. Use it to isolate lines to fight hum and buzz in broadcast or live sound applications, or convert unbalanced lines to balanced for long cable runs. A ground lift switch is provided to disconnect the input ground to the output.

Features:

• Single channel line level transformer isolation
• Use with both 1/4" and XLR connectors
• Insert in line to combat hum and noise in audio signals
• Convert unbalanced audio signals into balanced lines for long cable runs
• 1:1 turns ratio input to output
• +20 dB max signal level

IN AND OUT JACKS
Either of the two input and output connectors, XLR or 1/4" TRS jack (Tip = Pin 2, Ring = Pin 3) can be used for connection to line level signals. The two input jacks are connected in parallel with each other, as are the two output jacks. Use only one connector on each side at a time.

GROUND LIFT SWITCH
This switch disconnects the ground between the input connectors and the output connectors when set to the LFT position. The ground is connected through when the switch is in the GND position.