The M60 is a miniaturized condenser microphone with fully integrated electronics and immunity from RF interference typically caused by cell phones and GSM devices.
The LCB1 gives the user the ability to have logic button functionality that is physically separated from a microphone or table base. This affords the option of a table microphone such as a gooseneck or boundary microphone to be positioned farther from the conference table's edge where the mic coverage can clear laptop screens or other obstructions. In conjunction, the LCB1 can be positioned conveniently near the edge of the conference table, allowing for easy reach and access to button functionality. On/off or push to talk or push to mute selections can be programmed at the DSP. In jobs where ceiling microphones are deployed, the LCB1 can be installed to indicate when overhead mics are live or to mute a particular microphone or zone.
- Optimized for voice
- Immunity from RF interference
- Extremely high sensitivity
- Miniaturized integrated preamp circuitry
- Proprietary low noise circuitry
- Designed, machined, assembled & tested in the USA
- 3 year warranty
The striking design of the M60 brass housing is achieved through an intricate process utilizing a computer controlled machining center. The bottom of the housing is treated with a shock absorbent material for dampening purposes and has two threaded holes that allow the M60 to be bolted into a permanent position if desired.
A high quality 12' shielded mic cable is attached directly to the internal circuitry of the M60 with the ability to exit the housing at either 180 or 90 degrees, depending on whether the cable will be routed through a drilled surface. In addition, there are two types of connectors offered: XLRm or terminal connectors.
- Video Conferencing
- Board rooms