Contact Our Expert Sales Team:
888-462-7828Dale #:
DPA-4061OCCF03Availability:
Not in Stock - Reserve YoursThis item is not in stock and needs to be ordered from the manufacturer. Your payment will be charged after completing checkout. We will strive to ship as soon as possible, pending availability.
Description
This microphone is acoustically identical to the d:screet™ 4060 Miniature Omnidirectional Microphone, Normal SPL, but its sensitivity is adjusted to accommodate higher sound pressure levels (SPLs). The d:screet™ 4061 Miniature Omnidirectional Microphone, High SPL can handle SPL up to 144 dB ... Read MoreOur Price: $615.00
Free Shipping (Continental US)
Suggested Accessories
Description
This microphone is acoustically identical to the d:screet™ 4060 Miniature Omnidirectional Microphone, Normal SPL, but its sensitivity is adjusted to accommodate higher sound pressure levels (SPLs).
The d:screet™ 4061 Miniature Omnidirectional Microphone, High SPL can handle SPL up to 144 dB peak before clipping, making it one of the best miniatures for use on very loud sound sources, such as some instruments and human voices.
Features:
DPA originally designed this microphone for use with wireless systems in theaters but today it is one of the most loved mics for television and film applications as well. It is especially suited for capturing speech in all of its nuances and can be used to close-mike a wide range of instruments. This microphone handles sound pressure levels up to 134 dB before clipping occurs. This mic is well suited for applications where the sound source is more remote or damped and you need to have a good balance signal versus noise.
This series contains the 4060, 4061, 4062, 4063 and 4071 Omni Miniature Mics. Each version is tailored towards a specific application based on sensitivity, voltage and placement needs. They are all based on the original d:screet™ 4060; the very first miniature microphone developed by DPA from the best technology previously only used in hearing aids and measurement microphones. All of the mics in the series share important basic features, but each is optimized for particular applications.
The series was developed to withstand the toughest of conditions. They contain a 5.4 mm diameter pre-polarized condenser element with a vertical diaphragm. This unique, Double Vent Protection System makes the mics greatly resistant to humidity and sweat. These mics are also designed with a Kevlar-reinforced cable relief, which is built to withstand the constant twists, bends and pulls that are part of the everyday use in harsh environments.
CORE is available for select models of d:screet™ Miniature Microphones and d:fine™ Headset Microphones Series.
CORE by DPA makes these miniature microphones even better.
CORE by DPA increases the dynamic range of d:screet™ Miniature and d:fine™ Headset Microphones up to14 dB depending on the specific type of capsule.
This gives users more flexibility by expanding the range of sounds that can be captured. In most cases, sound engineers prefer a mic with a wide dynamic range because they can use one mic to capture a wider range of sounds and in more applications.
More +
Product Specs
Directional pattern | Omnidirectional |
Principle of operation | Pressure |
Cartridge type | Pre-polarized condenser |
Frequency range | 20 Hz - 20 kHz |
Frequency range, ±2 dB | Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz |
Sensitivity, nominal, ±3 dB at 1 kHz | 6 mV/Pa; -44 dB re. 1 V/Pa |
Equivalent noise level, A-weighted | Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A)) |
Equivalent noise level, ITU-R BS.468-4 | Typ. 38 dB (max. 40 dB) |
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) | Typ. 68 dB(A) |
Total harmonic distortion (THD) | < 1% THD up to 123 dB SPL peak; < 1% THD up to 120 dB SPL RMS sine |
Dynamic range | Typ. 111 dB |
Max. SPL, peak before clipping | 144 dB |
Output impedance | 30 - 40 |
Cable drive capability | Up to 300 m (984 ft) |
Power supply (for full performance) | For wireless systems: Min. 5 V - max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance |
Current Consumption | Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter |
Connector | MicroDot |
Color | Black, beige, brown or white |
Weight | 7.5 g (0.26 oz) incl. Cable and MicroDot connector |
Microphone diameter | 5.4 mm (0.21 in) |
Microphone length | 12.7 mm (0.5 in) |
Cable length | 1.8 m (5.9 ft) |
Polarity | Positively increasing sound pressure produces positive going voltage on MicroDot pin |
Temperature range | -40°C to 45°C (-40°F to 113°F) |
Relative humidity (RH) | Up to 90% |
More +
Also Popular
Talk To Our Sales Professionals:
888-462-7828
148-04 95th Ave
Jamaica, NY 11435
Monday - Friday 9:30am - 5:30pm EST
(closed Saturday/Sunday)
Questions or concerns about your order?
Info
Resources
Payment Options
© 2024 Dale Pro Audio. All Rights Reserved.
Dale Pro Audio is not responsible for technical inaccuracies, typographical errors, or incomplete or inaccurate content on this site. Prices and specifications subject to change without notice.