Electro-Voice MB-100 Forged Eyebolt Attachment Kit - Set Of Three

The MB100 Eye-Bolt Attachment Kit for SX100 & SX300 Loudspeakers provides three attachment points for secure suspension of a single speaker cabinet

DESCRIPTION
The Mb100 is intended for very simple installations only, to suspend an individual SX100 or SX300 loudspeaker in a near-vertical orientation.  A second, redundant insert point is provided in the top of the enclosure so a supplementary independent means of suspension can be attached when regulations specify. The enclosure can be positioned to angle downward slightly through the use of the pull-up point at the back of the enclosure.

The Mb100 Eye-Bolt Attachment Kit contains three lifting eye-bolts which screw into the inserts provided on the System 200 speakers. The eyebolt attachment points can then be used to suspend the System 200 speakers using hardware rated for overhead lifting.

HANGING INSTRUCTIONS
The speaker is hung using one or two main lifting “chains” with a pull-up point in the back for aiming. Two lifting chains can be used to prevent the speaker from swaying, but both of the rigging hardware (shackles, etc.) must fit through the 20-mm (3/4-in.) opening.