Zaxcom RX-12R Rack Mount Wireless Receiver System


Have a Question? Call Toll Free: 888-462-7828

Live Chat Email Us
Dale #:ZAXC-RX12R

Availability: Usually ships in 5 - 10 Days

This item usually ships within 5-10 days after your order is placed. Your payment will be charged after completing checkout.
Free Shipping (Continental US)
  • A sibling to the very successful RX-12, the new RX-12R has been completely reimagined from the ground up. Rack mountable, its ergonomic design takes up only one-and-a-half rack spaces in height. As a wide-band receiver its full tuning range is 512 – 698 MHz and features a 35 MHz tracking front end filter to eliminate interference from unwanted radio frequency (RF).

    The multifaceted design of the RX-12R, provides RF amplification and both antenna and power distribution for up to 6 Zaxcom QRX212 modules that fit precisely inside the RX-12R. For more critical applications, placing the QRX212 module in single channel mode will deliver 6 channels of true diversity audio while dual channel mode allows for up to 12 channels of audio when demand is less critical. All QRX212 modules are hot swappable and can be added or removed at any time, making the RX-12R ideal for rental companies where receiver requirements can change on a daily basis.

    The RX-12R receives a 100% digital signal that is fully encrypted resulting in audio quality far superior to any analog system. Additionally, it’s compatible with all Zaxcom modulations and transmitters. A full color LCD lets users easily navigate the menu. The built-in frequency scanner and Auto-Pick software eliminates the guess work and can coordinate and choose the best frequencies with a push of a button. 6 XLR analog outputs and two DB25 connectors configure 12 analog or 12 digital signals. An antenna in and RF loop through provide support to daisy chain up to three RX-12R receivers to one set of antennas.

    If paired with a Zaxcom Deva 24 or Nomad, the RX-12R can re-frequency the transmitters to match the RX-12R with a touch of a button via ZaxNet™. A new feature on the RX-12R is an internal audio monitoring system to plug in headphones. It also touts auto-switching 12V redundant DC inputs.

  • Output  
    Analog Audio Output Balanced 0dB @ -20 dBFS (2-channel receiver)
    Analog Audio Output Connectors 6 x Male XLR Outputs
    Digital Audio Output Connectors 2 x DB25
    Headphone Output 1 x 3.5 mm
    Digital I/O  
    Connectors 1 x USB / 1 x RS422
    RF Input Connectors 2 BNC
    RF Output Connectors 2 BNC
    RF Impedance 50 ohm
    RF Gain Input / Output 0 dB
    RF Amp Noise Figure .5 dB
    RF Amp IP3 +30 dB input
    RF Filter Band Pass 35 MHz
    RF Tuning Range 512 - 698 MHz
    QRX212 Module  
    Receivers Per Module 2
    Receiver Modulation Zaxcom Proprietary Digital
    Tuning Range 512 - 698 MHz
    Power Consumption 300 ma @ 12 VDC
    Size 5" x 3" x .8" (L x W x H)
    IFB200 Interface Switchcraft TA5-M
    Power 8 VDC to 18 VDC (2 amps w/6 x QRX212 modules)
    Power Type Dual input auto switching
    Power Connectors 2 x Hirose HR10A-7P-4P
    LCD Screen TFT daylight readable color
    LCD Size 2.2" diagonal
    Size 19" x 10.2" x 2.325" (L x W X H)
    Weight 4 lbs (loaded w/ 6 x QRX212 receiver modules)
  • Shipping rates calculator