Audix ADX18 Professional 18-Inch Gooseneck Condenser Microphone
Availability:
Special Order ItemThis item is not stocked and needs to be ordered from the manufacturer. Please contact our sales team for more information.
Description
The ADX series is a professional miniature gooseneck condenser microphone designed for applications such as podium, presentation, meetings and teleconferencing.
With a uniformly controlled cardioid polar pattern, the ADX12 & ADX18 helps isolate the speaker from ambient noise. The ADX series is available in a hypercardioid polar pattern for tighter pick-up control.
The ADX series is desiged with an integrated preamp circuitry built into the base of the XLR. They can be mounted permanently via the supplied flange mount or with an optional base with an internal shock mount (see model ATS10, ATS1, ATS1L). The microphone may also be used on a standard microphone stand using the DCLIP snap to fit microphone holder.
Features:
- Natural accurate sound
- Interchangeable capsule
- Low profile design
- Dual gooseneck sections allows for precise positioning
- Low noise electronics
- Available with cardioid or hypercardioid polar pattern
- Designed, assembled, manufactured & tested in the USA
Applications:
- Live sound, recording
- Stage productions
- Theatre
- Ceremonies, weddings
- Teleconferencing, boardroom
- Piano
- Room ambience
| Transducer Type | Pre-Polarized Condenser |
| Frequency Response | 40 Hz - 18 kHz |
| Polar Pattern | Cardioid/Hypercardiod |
| Output Impedance | 150 ohms |
| Sensitivity | 24 mV (C) / Pa @ 1k 30 mV (HC) / Pa @ 1k |
| Equivalent Noise Level | 28 dB (A weighted) |
| Signal to Noise Ratio | 66 dB |
| Maximum SPL | ³120 dB |
| Power Requirements | 18 - 52 Volts phantom |
| Connector | 3-pin XLRm |
| Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector |
| Materials / Finish | Machined Aluminum / Black Finish |
| Weight | 113 g / 4 oz (ADX12) 159 g / 5.6 oz (ADX18) |
| Length | 403 mm / 16 in (ADX12) 558 mm / 22 in (ADX18) |
The ADX series is a professional miniature gooseneck condenser microphone designed for applications such as podium, presentation, meetings and teleconferencing.
With a uniformly controlled cardioid polar pattern, the ADX12 & ADX18 helps isolate the speaker from ambient noise. The ADX series is available in a hypercardioid polar pattern for tighter pick-up control.
The ADX series is desiged with an integrated preamp circuitry built into the base of the XLR. They can be mounted permanently via the supplied flange mount or with an optional base with an internal shock mount (see model ATS10, ATS1, ATS1L). The microphone may also be used on a standard microphone stand using the DCLIP snap to fit microphone holder.
Features:
- Natural accurate sound
- Interchangeable capsule
- Low profile design
- Dual gooseneck sections allows for precise positioning
- Low noise electronics
- Available with cardioid or hypercardioid polar pattern
- Designed, assembled, manufactured & tested in the USA
Applications:
- Live sound, recording
- Stage productions
- Theatre
- Ceremonies, weddings
- Teleconferencing, boardroom
- Piano
- Room ambience
| Transducer Type | Pre-Polarized Condenser |
| Frequency Response | 40 Hz - 18 kHz |
| Polar Pattern | Cardioid/Hypercardiod |
| Output Impedance | 150 ohms |
| Sensitivity | 24 mV (C) / Pa @ 1k 30 mV (HC) / Pa @ 1k |
| Equivalent Noise Level | 28 dB (A weighted) |
| Signal to Noise Ratio | 66 dB |
| Maximum SPL | ³120 dB |
| Power Requirements | 18 - 52 Volts phantom |
| Connector | 3-pin XLRm |
| Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector |
| Materials / Finish | Machined Aluminum / Black Finish |
| Weight | 113 g / 4 oz (ADX12) 159 g / 5.6 oz (ADX18) |
| Length | 403 mm / 16 in (ADX12) 558 mm / 22 in (ADX18) |
Your home for all things pro audio—backed by expertise and experience. Connect with us today.
Your home for all things pro audio—backed by expertise and experience. Connect with us today.
