
Description
The M1250B-W-O, a miniaturized condenser microphone with a fully integrated preamp and detachable cable, has complete immunity from RF interference caused by cell phones and GSM devices. The M1250B-W-O, which is equipped with a cardioid capsule, is also available with hypercardioid, omni or shotgun capsules, giving the microphone the unique ability to be used in a wide variety of live, studio and broadcast applications.
The M1250B-W-O is available with a wide array of clips and accessories allowing the microphone to be used for drums, percussion, musical instruments, overhead stage miking, podiums, conferences, and presentations.
Features:
- Miniaturized integrated preamp circuitry
- 12 mm gold vapor diaphragm
- Immune to RF interference
- Extremely low noise, high SPL handling
- Machined brass, white powdercoat finish
| Transducer Type | Condenser |
| Frequency Response | 50 Hz - 19 kHz |
| Polar Pattern | Omni |
| Output Impedance | 150 ohms |
| Sensitivity | 11 mV - Pa @ 1K |
| Signal/Noise Ratio (A-weighted) | 73 dB |
| Equivalent Noise Level (A-weighted) | 21 dB |
| Maximum SPL @ .5% THD | 140 dB |
| Dynamic Range | 119 dB |
| Power Requirements | 18 - 52 Volts |
| Polarity | Pin 2 positive |
| Housing/Finish | Machined brass - Powder coat |
| Weight | 0.7 oz |
| Length | 2.1 inches |
| Transducer Type | Condenser |
| Frequency Response | 50 Hz - 19 kHz |
| Polar Pattern | Omni |
| Output Impedance | 150 ohms |
| Sensitivity | 11 mV - Pa @ 1K |
| Signal/Noise Ratio (A-weighted) | 73 dB |
| Equivalent Noise Level (A-weighted) | 21 dB |
| Maximum SPL @ .5% THD | 140 dB |
| Dynamic Range | 119 dB |
| Power Requirements | 18 - 52 Volts |
| Polarity | Pin 2 positive |
| Housing/Finish | Machined brass - Powder coat |
| Weight | 0.7 oz |
| Length | 2.1 inches |

