%20that%20sto...
){kind=link}
Audix M3GSERVO - Tri-Element Hanging Ceiling Microphone for Servoreelers, Charcoal Grey
Contact us
Availability:
Special Order ItemThis item is not stocked and needs to be ordered from the manufacturer. Please contact our sales team for more information.
Description
The M3GSERVO tri-element ceiling microphone is designed for Servoreelers. It is an audio capture solution designed specifically for the precision microphone retraction system (Servoreeler) that stores, deploys, retracts, and positions suspended microphone cable by remote control (sold separately). It can be used for live theater, video conferencing, courtroom activities, surgical procedures, and ambient room-miking applications.
Features:
- 100% RF shielding and immunity
- Gold diaphragm condenser capsules with studio quality sound
- Low impedance design allows for extremely long cable runs (if required) without cross talk or interference
- Frequency and pattern tailored for voice clarity and rejection of extraneous noise
- Evenly dispersed sound with undetectable phase
- High-quality silicone jacketed microphone cable with adjustable length and position
- Plenum rated junction box with RJ45 connector
- All visible components of the microphone and cable are same color: charcoal gray
- TAA compliant
- Very high output, low self-noise
- Easy to install
The M3 ceiling microphone incorporates three phase coherent hypercardioid capsules with tailored frequency response optimized for speech intelligibility. This is accomplished by minimizing frequencies caused by noise, vibration, paper shuffling, keyboard strokes, fans, and heating /air conditioning. Low noise preamp circuitry is employed for highest possible signal to noise and studio quality sound. A high-quality silicone jacketed microphone cable ensures a balanced, shielded signal and a very clean look. Electronics above the ceiling are housed within a plenum rated junction box and cable connections are made via an RJ45 connector embedded within a proprietary brass housing for an airtight seal.
Applications
- Zone Capture
- Video Conferencing
- Distance Learning
- Hospital and medical procedure
- Courtroom
- Ambient room miking
| Transducer Type | Pre-Polarized Condenser |
| Frequency Response | 30 Hz - 19 kHz |
| Optimized Response | 70 Hz - 9 kHz |
| Polar Pattern | Hypercardioid |
| Output Impedance | 150 Ohms balanced |
| Sensitivity | 34 mV / Pa @ 1k |
| Off Axis Rejection | 1 capsule>23 dB at 180¼ relative to 0¼ 2 capsules>18 dB at 120¼ 3 capsules>9 dB at 60¼ |
| Signal/Noise Ratio (A-weighted) | 72 dB |
| Equivalent Noise Level (Aweighted) | 22 dB (A weighted) |
| Maximum SPL @ .5% THD | ?128 dB |
| Dynamic Range | 106 dB |
| Power Requirements | 18 - 52 Volts phantom |
| Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 |
| Weight | 95 grams (mic only) / 3.32 ounces |
| Diameter | 50mm (2 inches) |
All Specifications Subject To Change Without Notice
The M3GSERVO tri-element ceiling microphone is designed for Servoreelers. It is an audio capture solution designed specifically for the precision microphone retraction system (Servoreeler) that stores, deploys, retracts, and positions suspended microphone cable by remote control (sold separately). It can be used for live theater, video conferencing, courtroom activities, surgical procedures, and ambient room-miking applications.
Features:
- 100% RF shielding and immunity
- Gold diaphragm condenser capsules with studio quality sound
- Low impedance design allows for extremely long cable runs (if required) without cross talk or interference
- Frequency and pattern tailored for voice clarity and rejection of extraneous noise
- Evenly dispersed sound with undetectable phase
- High-quality silicone jacketed microphone cable with adjustable length and position
- Plenum rated junction box with RJ45 connector
- All visible components of the microphone and cable are same color: charcoal gray
- TAA compliant
- Very high output, low self-noise
- Easy to install
The M3 ceiling microphone incorporates three phase coherent hypercardioid capsules with tailored frequency response optimized for speech intelligibility. This is accomplished by minimizing frequencies caused by noise, vibration, paper shuffling, keyboard strokes, fans, and heating /air conditioning. Low noise preamp circuitry is employed for highest possible signal to noise and studio quality sound. A high-quality silicone jacketed microphone cable ensures a balanced, shielded signal and a very clean look. Electronics above the ceiling are housed within a plenum rated junction box and cable connections are made via an RJ45 connector embedded within a proprietary brass housing for an airtight seal.
Applications
- Zone Capture
- Video Conferencing
- Distance Learning
- Hospital and medical procedure
- Courtroom
- Ambient room miking
| Transducer Type | Pre-Polarized Condenser |
| Frequency Response | 30 Hz - 19 kHz |
| Optimized Response | 70 Hz - 9 kHz |
| Polar Pattern | Hypercardioid |
| Output Impedance | 150 Ohms balanced |
| Sensitivity | 34 mV / Pa @ 1k |
| Off Axis Rejection | 1 capsule>23 dB at 180¼ relative to 0¼ 2 capsules>18 dB at 120¼ 3 capsules>9 dB at 60¼ |
| Signal/Noise Ratio (A-weighted) | 72 dB |
| Equivalent Noise Level (Aweighted) | 22 dB (A weighted) |
| Maximum SPL @ .5% THD | ?128 dB |
| Dynamic Range | 106 dB |
| Power Requirements | 18 - 52 Volts phantom |
| Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 |
| Weight | 95 grams (mic only) / 3.32 ounces |
| Diameter | 50mm (2 inches) |
All Specifications Subject To Change Without Notice
Your home for all things pro audio—backed by expertise and experience. Connect with us today.
Your home for all things pro audio—backed by expertise and experience. Connect with us today.
