DALE SKU # AUDX-M40W6HC

Audix M40W12 - Miniature High-Output Hypercardioid Ceiling Microphone with 6" Gooseneck, White

Contact us

  • Availability:

    Special Order Item
  • This item is not stocked and needs to be ordered from the manufacturer. Please contact our sales team for more information.


  • LET OUR TEAM OF EXPERTS ASSIST YOU

    Description

    The M40 is a miniaturized condenser microphone with a fully integrated preamp designed with very high sensitivity for distance miking. The primary applications for the ceiling mounted M40 include Video & Teleconferencing (VTC), distance learning, hospital rooms, surveillance and ambient room miking.

    Features:

    • Optimized for voice recognition
    • Immunity from RF interference
    • Point and shoot directivity
    • Integrated preamp circuitry
    • 12 mm gold vapor diaphragm
    • Extremely low noise, high sensitivity
    • Designed, assembled & tested in the USA
    • 3 year warranty

    The M40 ceiling microphone has complete immunity from RF interference caused by cell phones and GSM devices. The M40, which comes with a cardioid capsule, is also available with hypercardioid or shotgun capsules, allowing for the microphone to be used in a wide variety of applications.

    The M40 installed ceiling microphone is easy to install requiring only that a 5/8 inch hole be drilled in the ceiling with no additional tools required. The cable assembly is equipped with a terminal block connector. For installations where plenum rated cable is to be used a UL rated, metal plenum junction box is available.

    Applications:

    • Video & Teleconferencing (VTC)
    • Distance Learning
    • Surveillance
    • Hospital and Medical Procedures
    • Ambient room mic
    Transducer TypeCondenser
    Frequency Response60 Hz - 10 kHz
    Polar PatternHypercardioid
    Output Impedance150 Ohms
    Sensitivity34 mV / Pa @ 1k
    Signal/Noise Ratio (A-weighted)72 dB
    Equivalent Noise Level (Aweighted)22 dB
    Maximum SPL @ .5% THD?130 dB
    Dynamic Range108 dB
    Power Requirements18 - 52 Volts phantom
    Connector3-pin XLRm
    PolarityPositive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
    MaterialsCopper and Steel Powder Coat
    Weight0.7 oz / 20 g
    Length2.1 in / 54 mm

    All Specifications Subject To Change Without Notice

    The M40 is a miniaturized condenser microphone with a fully integrated preamp designed with very high sensitivity for distance miking. The primary applications for the ceiling mounted M40 include Video & Teleconferencing (VTC), distance learning, hospital rooms, surveillance and ambient room miking.

    Features:

    • Optimized for voice recognition
    • Immunity from RF interference
    • Point and shoot directivity
    • Integrated preamp circuitry
    • 12 mm gold vapor diaphragm
    • Extremely low noise, high sensitivity
    • Designed, assembled & tested in the USA
    • 3 year warranty

    The M40 ceiling microphone has complete immunity from RF interference caused by cell phones and GSM devices. The M40, which comes with a cardioid capsule, is also available with hypercardioid or shotgun capsules, allowing for the microphone to be used in a wide variety of applications.

    The M40 installed ceiling microphone is easy to install requiring only that a 5/8 inch hole be drilled in the ceiling with no additional tools required. The cable assembly is equipped with a terminal block connector. For installations where plenum rated cable is to be used a UL rated, metal plenum junction box is available.

    Applications:

    • Video & Teleconferencing (VTC)
    • Distance Learning
    • Surveillance
    • Hospital and Medical Procedures
    • Ambient room mic
    Transducer TypeCondenser
    Frequency Response60 Hz - 10 kHz
    Polar PatternHypercardioid
    Output Impedance150 Ohms
    Sensitivity34 mV / Pa @ 1k
    Signal/Noise Ratio (A-weighted)72 dB
    Equivalent Noise Level (Aweighted)22 dB
    Maximum SPL @ .5% THD?130 dB
    Dynamic Range108 dB
    Power Requirements18 - 52 Volts phantom
    Connector3-pin XLRm
    PolarityPositive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
    MaterialsCopper and Steel Powder Coat
    Weight0.7 oz / 20 g
    Length2.1 in / 54 mm

    All Specifications Subject To Change Without Notice

    Your home for all things pro audio—backed by expertise and experience. Connect with us today.

    Your home for all things pro audio—backed by expertise and experience. Connect with us today.