Audix M70N - Flush-Mount Condenser Ceiling Microphone, Satin Nickel Finish
Contact us
Availability:
Special Order ItemThis item is not stocked and needs to be ordered from the manufacturer. Please contact our sales team for more information.
Description
The M70 flush mount condenser microphone is designed for distance miking. Features include a fully integrated preamp, an extremely high sensitivity rating of 38 millivolts and a small footprint of only 3 inches in diameter. The M70 applications include video conferencing, distance learning, hospital rooms, surveillance and ambient room miking. The M70 offers a flush mount solution, easy installation and allows the microphone to completely disappear from view without sacrificing sound quality.
Features:
- High output for distance miking
- Optimized for voice recognition
- Immunity from RF interference
- Operates on 18-52 volts phantom power
- Point and shoot directivity
- Miniaturized integrated preamp circuitry
- No external power adapter needed
- 12 mm gold vapor diaphragm
- Extremely low noise, high sensitivity
- Optional junction box available
The M70 capsule is housed within a proprietary machined cradle that enables the microphone to be aimed and focused up to an angle of 45 degrees towards the source. In addition, the M70 has complete immunity from RF interference caused by cell phones and GSM devices.
The M70 terminates in a Phoenix connector and is easy to install, requiring only that a 2 inch hole to be drilled with no additional tools necessary.
Applications:
- Video Conferencing
- Distance Learning
- Surveillance
- Hospital and Medical Procedures
- Ambient room miking
| Transducer Type | Condenser |
| Frequency Response | 60 Hz - 10 kHz |
| Polar Pattern | Cardioid |
| Output Impedance | 150 ohms |
| Sensitivity | 38 mV / Pa @ 1k |
| Signal/Noise Ratio (A-weighted) | 72 dB |
| Equivalent Noise Level (A-weighted) | 22 dB |
| Maximum SPL @ .5% THD | ?130dB |
| Dynamic Range | 108 dB |
| Power Requirements | 18 - 52v phantom |
| Connector | 3 pin mini-XLRm |
| Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 |
| Housing / Finish | Aluminum and steel powder coat |
| Weight | 3.3 ounces / 94 g |
| Length | 2.6 inches / 65 mm |
All Specifications Subject To Change Without Notice
The M70 flush mount condenser microphone is designed for distance miking. Features include a fully integrated preamp, an extremely high sensitivity rating of 38 millivolts and a small footprint of only 3 inches in diameter. The M70 applications include video conferencing, distance learning, hospital rooms, surveillance and ambient room miking. The M70 offers a flush mount solution, easy installation and allows the microphone to completely disappear from view without sacrificing sound quality.
Features:
- High output for distance miking
- Optimized for voice recognition
- Immunity from RF interference
- Operates on 18-52 volts phantom power
- Point and shoot directivity
- Miniaturized integrated preamp circuitry
- No external power adapter needed
- 12 mm gold vapor diaphragm
- Extremely low noise, high sensitivity
- Optional junction box available
The M70 capsule is housed within a proprietary machined cradle that enables the microphone to be aimed and focused up to an angle of 45 degrees towards the source. In addition, the M70 has complete immunity from RF interference caused by cell phones and GSM devices.
The M70 terminates in a Phoenix connector and is easy to install, requiring only that a 2 inch hole to be drilled with no additional tools necessary.
Applications:
- Video Conferencing
- Distance Learning
- Surveillance
- Hospital and Medical Procedures
- Ambient room miking
| Transducer Type | Condenser |
| Frequency Response | 60 Hz - 10 kHz |
| Polar Pattern | Cardioid |
| Output Impedance | 150 ohms |
| Sensitivity | 38 mV / Pa @ 1k |
| Signal/Noise Ratio (A-weighted) | 72 dB |
| Equivalent Noise Level (A-weighted) | 22 dB |
| Maximum SPL @ .5% THD | ?130dB |
| Dynamic Range | 108 dB |
| Power Requirements | 18 - 52v phantom |
| Connector | 3 pin mini-XLRm |
| Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 |
| Housing / Finish | Aluminum and steel powder coat |
| Weight | 3.3 ounces / 94 g |
| Length | 2.6 inches / 65 mm |
All Specifications Subject To Change Without Notice
Your home for all things pro audio—backed by expertise and experience. Connect with us today.
Your home for all things pro audio—backed by expertise and experience. Connect with us today.
