DALE SKU # AUDX-MG15

Audix MG15 Cardioid 15-Inch Gooseneck Microphone

Sale price$281.00 Regular price$419.00
Save $138.00
  • Availability:

    Special Order Item
  • This item is not stocked and needs to be ordered from the manufacturer. Please contact our sales team for more information.


  • LET OUR TEAM OF EXPERTS ASSIST YOU

    Description

    The MG Series gooseneck system is equipped with a sophisticated dual preamp circuitry – one circuit located in the capsule housing and the other built into the base of the XLR. This circuitry is internally balanced, insuring the audio path will be isolated from hum and noise. In addition, this circuitry provides protection from RF interference and spurious emissions from cell phones and wireless GSM devices.

    The MG12, MG15 and MG18 are professional miniature gooseneck condenser microphones designed for applications such as podium, presentation, meetings and teleconferencing. The MG condenser microphones are designed with a uniformly controlled cardioid polar pattern, helping to isolate the speaker from ambient noise. These models are also available in a hypercardioid polar pattern. With a wide frequency range of 60 Hz - 19 kHz, the MG provide natural sound with exceptional vocal response.

    Features:

    • Natural accurate sound
    • Modular threaded capsule(s)
    • Low noise electronics, dual circuitry, internally balanced
    • RF Immunity
    • Low profile design
    • Tension fit design for stable positioning

    Suggested Applications:

    • Pulpit, podium
    • Board meetings
    • Video Teleconferencing
    • Courtroom
    Transducer Type Pre-Polarized Condenser
    Frequency Response 60 Hz - 19 kHz
    Polar Pattern Cardioid or Hypercardioid (capsule dependent)
    Output Impedance 150 Ohms balanced
    Sensitivity 32 mV (C) / Pa @ 1k
    38 mV (HC) / Pa @ 1k
    Equivalent Noise Level 22 dB (A weighted)
    Signal to Noise Ratio 72 dB
    Power Requirements 18 - 52 Volts phantom
    Maximum SPL ³130 dB
    Dynamic Range 108 dB
    Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
    Materials / Finish Machined Brass / Black Finish
    Weight 118 g / 4.16 ounces (MG12)
    126 g / 4.44 ounces (MG15)
    134 g / 4.73 ounces (MG18)
    Length 415 mm / 16.3 inches (MG12)
    480 mm / 18.9 inches (MG15)
    570 mm / 22.4 inches (MG18)

    The MG Series gooseneck system is equipped with a sophisticated dual preamp circuitry – one circuit located in the capsule housing and the other built into the base of the XLR. This circuitry is internally balanced, insuring the audio path will be isolated from hum and noise. In addition, this circuitry provides protection from RF interference and spurious emissions from cell phones and wireless GSM devices.

    The MG12, MG15 and MG18 are professional miniature gooseneck condenser microphones designed for applications such as podium, presentation, meetings and teleconferencing. The MG condenser microphones are designed with a uniformly controlled cardioid polar pattern, helping to isolate the speaker from ambient noise. These models are also available in a hypercardioid polar pattern. With a wide frequency range of 60 Hz - 19 kHz, the MG provide natural sound with exceptional vocal response.

    Features:

    • Natural accurate sound
    • Modular threaded capsule(s)
    • Low noise electronics, dual circuitry, internally balanced
    • RF Immunity
    • Low profile design
    • Tension fit design for stable positioning

    Suggested Applications:

    • Pulpit, podium
    • Board meetings
    • Video Teleconferencing
    • Courtroom
    Transducer Type Pre-Polarized Condenser
    Frequency Response 60 Hz - 19 kHz
    Polar Pattern Cardioid or Hypercardioid (capsule dependent)
    Output Impedance 150 Ohms balanced
    Sensitivity 32 mV (C) / Pa @ 1k
    38 mV (HC) / Pa @ 1k
    Equivalent Noise Level 22 dB (A weighted)
    Signal to Noise Ratio 72 dB
    Power Requirements 18 - 52 Volts phantom
    Maximum SPL ³130 dB
    Dynamic Range 108 dB
    Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
    Materials / Finish Machined Brass / Black Finish
    Weight 118 g / 4.16 ounces (MG12)
    126 g / 4.44 ounces (MG15)
    134 g / 4.73 ounces (MG18)
    Length 415 mm / 16.3 inches (MG12)
    480 mm / 18.9 inches (MG15)
    570 mm / 22.4 inches (MG18)

    Your home for all things pro audio—backed by expertise and experience. Connect with us today.

    Your home for all things pro audio—backed by expertise and experience. Connect with us today.