
Description
Designed, machined, assembled and tested by Audix in the USA, the SCX1-O is a professional studio cardioid condenser microphone designed for a wide variety recording, broadcast, and live sound applications. Known for its sensitivity, pin-point accuracy, low profile and consistency, the SCX1-O is also available with hypercardioid (model SCX1-HC) or cardioid (model SCX1-C) capsules. Features:
- Small, low profile, easy to place
- Low noise electronics
- Extremely sensitive, highly accurate
- 21 mm gold vapor diaphragm
- Roadworthy
With a smooth uniform frequency response from 40 Hz - 20 kHz, the SCX1-O is very consistent when responding to on and off-axis signals, and exhibiting excellent phase coherence. The SCX1-O is characterized with a omnidirectional polar pattern; this, coupled with the high output and sensitivity of the microphone, makes the SCX1-O an ideal choice for miking overhead, room ambience, orchestral sections, stringed instruments, piano, vibes and sound effects.
Other features include a 21 mm gold vapor capsule miniaturized electronics, and an extremely small footprint. The SCX1-O will handle sound pressure levels of 130 dB and will provide up to 20 dB of ambient noise rejection. In addition to acoustical instruments, the SCX1-O is an excellent choice for group vocals, speech or foley work.
The SCX1, which is manufactured to exacting standards and tight tolerances, features a precision machined brass body, interchangeable capsules, black e-coat finish, laser etched model and serial number, Switchcraft® XLR connector and includes a heavy duty nylon clip.
| Transducer Type | Condenser |
| Frequency Response | 40 Hz - 20 kHz |
| Polar Pattern | Omni |
| Output Impedance | 200 ohms |
| Sensitivity | 15.5 mV - Pa @ 1K |
| Equivalent Noise Level (A-weighted) | 14 dB |
| Signal/Noise Ratio (A-weighted) | 80 dB |
| Power Requirements | 48 - 52 Volts |
| Maximum SPL @ .5% THD | 130 dB |
| Dynamic Range | 116 dB |
| Polarity | Pin 2 positive |
| Housing - Finish | Brass - Black |
| Weight | 4 oz |
| Length | 4.1 inches |
| Transducer Type | Condenser |
| Frequency Response | 40 Hz - 20 kHz |
| Polar Pattern | Omni |
| Output Impedance | 200 ohms |
| Sensitivity | 15.5 mV - Pa @ 1K |
| Equivalent Noise Level (A-weighted) | 14 dB |
| Signal/Noise Ratio (A-weighted) | 80 dB |
| Power Requirements | 48 - 52 Volts |
| Maximum SPL @ .5% THD | 130 dB |
| Dynamic Range | 116 dB |
| Polarity | Pin 2 positive |
| Housing - Finish | Brass - Black |
| Weight | 4 oz |
| Length | 4.1 inches |


