DALE SKU # LEWI-LCT540S

Lewitt Audio LCT 540-SUBZERO Large Diaphragm Condenser Microphone

Sale price$799.00
  • Availability:

    Special Order Item
  • This item is not stocked and needs to be ordered from the manufacturer. Please contact our sales team for more information.


  • LET OUR TEAM OF EXPERTS ASSIST YOU

    Description

    Lewitt Audio's unique approach towards electronics and capsule design makes the microphone better than human hearing. With the LCT 540 S, they set a new benchmark in terms of capturing fine-grained details of your recording source. Record details of your voice and instruments that usually wouldn’t even be audible. Make every detail count. Even the subtlest nuances sound crystal clear. With its cutting-edge circuit and capsule design, the LCT 540 SUBZERO features an impressive dynamic range of 132 dB to capture everything from loud to subtle. You won’t hear the self-noise of the mic even after heavily compressing the signal.

    Features:

    • 1" true condenser studio microphone
    • Self-noise below the threshold of human hearing 
    • Ideal for extreme processing
    • Low-cut filters and attenuation
    • Cardioid polar pattern


    Self-noise values below the threshold of human hearing
    Our hearing threshold is very frequency-dependent. It is less sensitive towards low and very high frequencies and most sensitive around 2 – 5 kHz. With our specific and unique approach towards circuit and capsule design, we were able to realize self-noise that'll stay below the threshold of hearing across the entire frequency spectrum.

    To measure the self-noise of the LCT 540 SUBZERO, we built a unique device. It's ten times more massive than conventional ones, weighing over 4500 kg or 9900 lbs in total. This amount of mass will dampen frequencies up to a 1/10,000th of their sound pressure. The frequency range from 20 Hz to 20,000 Hz is dampened by 60 dB, up to 80 dB on the higher frequencies.

    Acoustical operating principle Pressure gradient transducer, externally polarized
    Diaphragm 3 micron gold sputtered Mylar
    Transducer ¯ 25.4 mm, 1 in
    Polar pattern Cardioid
    Sensitivity 41 mV/Pa, -28 dBV/Pa
    Equivalent noise level 4 dB (A)
    Max. SPL for 0.5 % THD 136 dBSPL, 0 dB pre-attenuation
    Signal / noise ratio 90 dB (A)
    Dynamic range 132 dB (A)
    Pre-attenuation pad 0 dB
    -6 dB
    -12 dB
    Low-cut filter linear
    80 Hz (6 dB/oct)
    160 Hz (6 dB/oct)
    Internal impedance 68 ½
    Supply voltage 48 V ± 4 V
    Current consumption 3.6 mA
    Mic enclosure Zinc die cast
    Connector Gold plated 3-pin XLR
    Microphone dimensions 158 x 52 x 36 mm, 6.22 x 2.04 x 1.42 in
    Microphone net weight 371 g, 13.1 oz

    Lewitt Audio's unique approach towards electronics and capsule design makes the microphone better than human hearing. With the LCT 540 S, they set a new benchmark in terms of capturing fine-grained details of your recording source. Record details of your voice and instruments that usually wouldn’t even be audible. Make every detail count. Even the subtlest nuances sound crystal clear. With its cutting-edge circuit and capsule design, the LCT 540 SUBZERO features an impressive dynamic range of 132 dB to capture everything from loud to subtle. You won’t hear the self-noise of the mic even after heavily compressing the signal.

    Features:

    • 1" true condenser studio microphone
    • Self-noise below the threshold of human hearing 
    • Ideal for extreme processing
    • Low-cut filters and attenuation
    • Cardioid polar pattern


    Self-noise values below the threshold of human hearing
    Our hearing threshold is very frequency-dependent. It is less sensitive towards low and very high frequencies and most sensitive around 2 – 5 kHz. With our specific and unique approach towards circuit and capsule design, we were able to realize self-noise that'll stay below the threshold of hearing across the entire frequency spectrum.

    To measure the self-noise of the LCT 540 SUBZERO, we built a unique device. It's ten times more massive than conventional ones, weighing over 4500 kg or 9900 lbs in total. This amount of mass will dampen frequencies up to a 1/10,000th of their sound pressure. The frequency range from 20 Hz to 20,000 Hz is dampened by 60 dB, up to 80 dB on the higher frequencies.

    Acoustical operating principle Pressure gradient transducer, externally polarized
    Diaphragm 3 micron gold sputtered Mylar
    Transducer ¯ 25.4 mm, 1 in
    Polar pattern Cardioid
    Sensitivity 41 mV/Pa, -28 dBV/Pa
    Equivalent noise level 4 dB (A)
    Max. SPL for 0.5 % THD 136 dBSPL, 0 dB pre-attenuation
    Signal / noise ratio 90 dB (A)
    Dynamic range 132 dB (A)
    Pre-attenuation pad 0 dB
    -6 dB
    -12 dB
    Low-cut filter linear
    80 Hz (6 dB/oct)
    160 Hz (6 dB/oct)
    Internal impedance 68 ½
    Supply voltage 48 V ± 4 V
    Current consumption 3.6 mA
    Mic enclosure Zinc die cast
    Connector Gold plated 3-pin XLR
    Microphone dimensions 158 x 52 x 36 mm, 6.22 x 2.04 x 1.42 in
    Microphone net weight 371 g, 13.1 oz

    Your home for all things pro audio—backed by expertise and experience. Connect with us today.

    Your home for all things pro audio—backed by expertise and experience. Connect with us today.