Have a Question? Contact Us

888-462-7828 Live Chat

Radial Engineering Voco-Loco Mic/Instrument Effects Switcher

 
  • Dale #:

    RADI-VOCOLOCO
  • Availability:

    Reserve Yours Now
  • This item usually ships within 10-20 days after your order is placed. Your payment will be charged after completing checkout.

Description

The Voco-Loco is a foot-controlled effects loop that enables the lead vocalist, sax or trumpet player to incorporate guitar effects pedals into the signal path, just like an electric guitarist adds effects for soloing. With the Voco-Loco in your signal chain, you can add delay or reverb, maybe a ... Read More

Free Shipping (Continental US)

Have a Question?

Call Toll Free: 888-462-7828 Live Chat Email Us

Suggested Accessories

Description

The Voco-Loco is a foot-controlled effects loop that enables the lead vocalist, sax or trumpet player to incorporate guitar effects pedals into the signal path, just like an electric guitarist adds effects for soloing. With the Voco-Loco in your signal chain, you can add delay or reverb, maybe a touch of distortion or even a special effect like a wah-wah to enhance your solo performance. The options are only limited by your imagination and desire to stand out from the crowd!

Features:

  • Add guitar effects pedals to vocals or instruments
  • Create exciting and unique effects as you perform
  • Turn on multiple effects using one footswitch
  • Works with either dynamic or condenser microphones

The design begins with a state-of-the-art mic preamp that is designed to accept both a standard dynamic microphone or a condenser by activating the built-in phantom power supply. A great sounding two band EQ with low and high frequency shelving makes it easy to add warmth and shimmer. The signal is then sent to the guitar pedals via a transformer isolated hi-Z effects loop circuit that is equipped with individual send & receive controls to optimize signal-to-noise and reduce distortion. A tone control on the return path lets you smooth the sound of pedals that may be overly bright and the blend control lets you mix the original 'dry' signal with the 'wet' effect to set the perfect mix.

Simply plug your mic into the Voco-Loco via the XLR input, connect your effects pedals using standard ¼" guitar cables, and then send the output from the Voco-Loco to the input on your mixer. Before the song begins, choose which effects you want on and - when you are ready - activate the loop using the right hand footswitch. A second footswitch serves double-duty as either a mute switch to turn off the mic between sets or as a 100% wet effects loop for special situations where you may not want any of the clean signal to pass through.

More +

Product Specs

Audio circuit type:  Integrated Op-Amp with Class A FET input circuit
Frequency response:  20Hz ~ 20kHz
Total harmonic distortion:  <0.005%
Dynamic range: 100dB
Input impedance: 10K-Ohms
Maximum input:  +10dB
Gain: 52dB
Clip level output: +15dBu
Output impedance: 300 Ohms
Equivalent input noise:  -120dBu
Noise floor: -85dBu
Intermodulation distortion: <0.005%
Phase deviation: 8° @50Hz
Common mode rejection: -73dB @55Hz
FX loop input impedance: 100K
FX loop output impedance: 3000 Ohms
Features   
Microphone input:  Microphone gain
Low frequency EQ
High frequency EQ
48V Phantom* (40V)
Effects loop:  Send level
Receive level
180° polarity reverse
Dry-wet mix
Switches: Footswitch-1: effects loop in/out
Footswitch-2 full wet or mute*
Side access: sets footswitch-2 to all wet or mute
Ground Lift: disconnects pin-1 at XLR output
Polarity: 180° signal polarity reverse switch
Input pad: Autopadding - input automatically pads as gain is reduced
Output: Pin 1 ground, Pin 2 (+), Pin 3 (-)
General 
Construction:  14 gauge steel chassis and outer shell
Finish: Baked enamel
Size:  (L x W x D) coming soon
Weight:  coming soon
Shipping size: (L x W x D) coming soon
Shipping weight: coming soon
Power:  15VDC / 400 mA
Warranty:  Radial 3-year, transferable

More +

Shipping Rate Calculator

 

Also Popular