Description
The Sennhesier EM 300-500 G4 is a true diversity half-rack receiver in a full-metal housing with intuitive OLED display for full control with increased bandwidth and transmission power, ready to take the world‘s biggest live stages. For evolution wireless G4 300 and 500 Series systems.
Features:
- True diversity half-rack receiver in a full-metal housing with intuitive OLED display for full control
- Easy and exible wireless synchronization between transmitter and receiver via infrared
- Up to 32 compatible channels
- Up to 88 MHz bandwidth with 3520 selectable frequen- cies, fully tunable in a stable UHF range
- Ethernet connection for Wireless Systems Manager (WSM) control software for advanced frequency coordi- nation in multi-channel setups
- High RF output power (up to 50 mW, adjustable in three steps 10/30/50) depending on country regulations
What's In The Box:
- EM 300-500 G4 true diversity receiver
- 2 rod antennas
- Power supply
- GA 3 rackmount set
- Quick guide
- Safety guide
- Manufacturer declaration sheet
RF characteristics | |
Modulation | Wideband FM |
Frequency ranges | Aw+: 470 - 558 MHz Gw1: 558 - 608 MHz |
Receiving frequencies | Max. 2880 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 32 factory-pre- set channels, no intermo- dulation 6 frequency banks with up to 32 programmable channels |
Switching bandwidth | up to 72 MHz |
Nominal/peak deviation | ±24 kHz / ±48 kHz |
Receiver principle | True diversity |
Sensitivity (with HDX, peak deviation) | < 2.5 V for 52 dBA eff S/N |
Adjacent channel selection | Typically 75 dB |
Intermodulation attenuation | Typically 70 dB |
Blocking | 75 dB |
Squelch | 5 to 25 dB V in steps of 2 dB |
Pilot tone squelch | Can be switched off |
Antenna inputs | 2 BNC sockets |
AF characteristics | |
Compander system | Sennheiser HDX |
EQ presets (switchable, act on line and monitor outputs) | Preset 1: Flat Preset 2: Low Cut (-3 dB at 180 Hz) Preset 3: Low Cut/High Boost (-3 dB at 180 Hz, +6 dB at 10 kHz) Preset 4: High Boost (+6 dB at 10 kHz) |
Signal-to-noise ratio (1 mV, peak deviation) | 115 dBA |
Total harmonic distortion (THD) | 0.9 % |
AF output voltage (at peak deviation, 1 kHz AF) | 6.3 mm jack socket (unbalanced): +12 dBu XLR socket (balanced): +18 dBu |
Setting range ÒAF OutÓ | 48 dB (3 dB steps) |
Overall device | |
Temperature range | -10 ¡C to +55 ¡C |
Power supply | 12 V DC |
Current consumption | 350 mA |
Dimensions | Approx. 202 x 212 x 43 mm |
Weight | Approx. 980 g |
The Sennhesier EM 300-500 G4 is a true diversity half-rack receiver in a full-metal housing with intuitive OLED display for full control with increased bandwidth and transmission power, ready to take the world‘s biggest live stages. For evolution wireless G4 300 and 500 Series systems.
Features:
- True diversity half-rack receiver in a full-metal housing with intuitive OLED display for full control
- Easy and exible wireless synchronization between transmitter and receiver via infrared
- Up to 32 compatible channels
- Up to 88 MHz bandwidth with 3520 selectable frequen- cies, fully tunable in a stable UHF range
- Ethernet connection for Wireless Systems Manager (WSM) control software for advanced frequency coordi- nation in multi-channel setups
- High RF output power (up to 50 mW, adjustable in three steps 10/30/50) depending on country regulations
What's In The Box:
- EM 300-500 G4 true diversity receiver
- 2 rod antennas
- Power supply
- GA 3 rackmount set
- Quick guide
- Safety guide
- Manufacturer declaration sheet
RF characteristics | |
Modulation | Wideband FM |
Frequency ranges | Aw+: 470 - 558 MHz Gw1: 558 - 608 MHz |
Receiving frequencies | Max. 2880 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 32 factory-pre- set channels, no intermo- dulation 6 frequency banks with up to 32 programmable channels |
Switching bandwidth | up to 72 MHz |
Nominal/peak deviation | ±24 kHz / ±48 kHz |
Receiver principle | True diversity |
Sensitivity (with HDX, peak deviation) | < 2.5 V for 52 dBA eff S/N |
Adjacent channel selection | Typically 75 dB |
Intermodulation attenuation | Typically 70 dB |
Blocking | 75 dB |
Squelch | 5 to 25 dB V in steps of 2 dB |
Pilot tone squelch | Can be switched off |
Antenna inputs | 2 BNC sockets |
AF characteristics | |
Compander system | Sennheiser HDX |
EQ presets (switchable, act on line and monitor outputs) | Preset 1: Flat Preset 2: Low Cut (-3 dB at 180 Hz) Preset 3: Low Cut/High Boost (-3 dB at 180 Hz, +6 dB at 10 kHz) Preset 4: High Boost (+6 dB at 10 kHz) |
Signal-to-noise ratio (1 mV, peak deviation) | 115 dBA |
Total harmonic distortion (THD) | 0.9 % |
AF output voltage (at peak deviation, 1 kHz AF) | 6.3 mm jack socket (unbalanced): +12 dBu XLR socket (balanced): +18 dBu |
Setting range ÒAF OutÓ | 48 dB (3 dB steps) |
Overall device | |
Temperature range | -10 ¡C to +55 ¡C |
Power supply | 12 V DC |
Current consumption | 350 mA |
Dimensions | Approx. 202 x 212 x 43 mm |
Weight | Approx. 980 g |
Your home for all things pro audio—backed by expertise and experience. Connect with us today.
Your home for all things pro audio—backed by expertise and experience. Connect with us today.