Contact Our Expert Sales Team:

888-462-7828

Shure KSM141SL Dual Pattern Small Diaphragm Condenser Microphone (Matched Pair)

 
  • Dale #:

    SHUR-KSM141SLSTEREO
  • Availability:

    Not in Stock - Reserve Yours
  • This item is not in stock and needs to be ordered from the manufacturer. Your payment will be charged after completing checkout. We will strive to ship as soon as possible, pending availability.

Description

The KSM141 is a dual-pattern end-addressed condenser microphone with a rotating collar, allowing easy switching between a consistent cardioid or true omnidirectional polar pattern for smooth and extremely focused sound reproduction. Designed for studio use, yet rugged enough for live applications... Read More

Free Shipping (Continental US)

Have a Question?

Call Toll Free: 888-462-7828 Live Chat Email Us

Suggested Accessories

Description

The KSM141 is a dual-pattern end-addressed condenser microphone with a rotating collar, allowing easy switching between a consistent cardioid or true omnidirectional polar pattern for smooth and extremely focused sound reproduction. Designed for studio use, yet rugged enough for live applications, the KSM141 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments.

Features

  • A mechanical polar pattern switch for highly consistent cardioid and true omnidirectional polar patterns. Provides flexibility in a wide variety of recording applications
  • Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar® diaphragm for superior transient response
  • Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
  • Premium electronic components, including gold-plated internal and external connectors
  • Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration
  • Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
  • Three-position switchable low-frequency filter to reduce background noise and counteract proximity effect
  • Extended frequency response
  • Low self-noise
  • Exceptional reproduction of low-frequency sounds
  • Can withstand high sound pressure levels (SPL)
  • High output level
  • No crossover distortion
  • Uniform polar response
  • Superior common mode rejection and suppression of radio frequency interference

More +

Product Specs

Cartridge TypePermanently Biased Condenser
Frequency Response20 to 20,000 Hz
Directional Polar PatternCardioid/Omnidirectional
Output Impedance150 ohms (actual)
Attenuation Switch0 dB, 15 dB, or 25 dB attenuation
Low Frequency Response SwitchFlat; -6 db/octave below 115 Hz
-18 dB/octave below 80 Hz
Phantom Power48 Vdc +/- 4 Vdc (IEC­268­15/DIN 45 596), positive pins 2 and 3
Current Drain4.65 mA typical at 48 Vdc
Common Mode Rejection>50 dB, 20 Hz to 20 kHz
PolarityPositive pressure on diaphragm produces positive voltage on output pin 2 relative to
pin 3
Dimensions and Weight20 mm (0.8 in.) diameter, 146 mm (5.75 in.) long
156 grams (5.5 oz.)
Sensitivity (typical, at 1000 Hz; 1 Pa = 94 dB SPL)-37 dBV/Pa
Self­noise (typical, equivalent SPL; A-weighted, IEC 651)14 dB
Maximum SPL5000 ohm load (Attenuator on): 145 (160, 170) dB
2500 ohm load (Attenuator on): 139 (154, 164) dB
1000 ohm load (Attenuator on): 134 (149, 159) dB
Output Clipping Level5000 ohm load: 15 dBV
2500 ohm load: 9 dBV
1000 ohm load: 3 dBV
Dynamic Range5000 ohm load: 131 dB
2500 ohm load: 125 dB
1000 ohm load: 120 dB
Signal to Noise Ratio80 dB

More +

Shipping Rate Calculator

 

Also Popular