Shure MX415DUAL/C - Dual Element Gooseneck Microphone with Dual TA4F Outputs
Availability:
Special Order ItemThis item is not stocked and needs to be ordered from the manufacturer. Please contact our sales team for more information.
Description
When important issues are on the line, the MX415DUAL/C captures it all - twice. The microphone features two electret condenser cartridges mounted in a single low-profile housing and two preamp-equipped outputs providing redundant audio for critical, multi-feed live sound and professional broadcast applications. The MXA415D has a 15" overall length and equipped with a flexible top gooseneck section for optimal placement.
Features:
- 15-inch gooseneck
- Low-profile dual cardioid capsule design
- Single-flex gooseneck provides optimal mic adjustment
- Mounts on table, lectern, podium or similar surface
The MX415DUAL/C delivers redundant audio capture for applications that require premium results when failure isn’t an option. With a unique dual capsule design, every word is captured simultaneously by two cardioid cartridges, each to a separate output preamp – providing reliable multi-feed audio for a variety of applications.
All the details are captured
Low profile dual cartridge, dual-feed design ensures the signal gets through.
Everything Is Covered
A complete set of included accessories are included to meet a variety of placement needs – from lectern, to table, to podium.
Clean signal
Shure Commshield® technology is built into Microflex to reject RF interference from mobile devices, keeping focus on the speech.
| Cartridge Type | Electret Condenser |
| Frequency Response | 50Ð17000 Hz |
| Polar Pattern | Cardioid |
| Output Impedance | 180 ½ |
| Output Configuration | Active Balanced |
Sensitivity @ 1 kHz, open circuit voltage |
Ð35 dBV/Pa (18 mV) |
| Maximum SPL, 1 kHz at 1% THD, 1 k½ load | 124 dB |
| Self Noise, A-weighted | 28 dB SPL |
| Signal-to-Noise Ratio, Ref. 94 dB SPL at 1 kHz | 66 dB |
| Dynamic Range, 1 k½ load, @ 1 kHz | 96 dB |
| Common Mode Rejection, 10 Hz to 100 kHz | 45 dB, minimum |
| Clipping Level at 1% THD | -6 dBV |
| Polarity | Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector |
| Weight | 205 g (7.23 oz) |
| Operating Temperature | -18 Ð 57¡C (0 Ð 135¡F) |
| Storage Temperature | -29 Ð 74¡C (-20 Ð 165¡F) |
| Relative Humidity | 0 Ð 95% |
| Power Requirements | 11Ð52 V DC, 2.0 mA |
When important issues are on the line, the MX415DUAL/C captures it all - twice. The microphone features two electret condenser cartridges mounted in a single low-profile housing and two preamp-equipped outputs providing redundant audio for critical, multi-feed live sound and professional broadcast applications. The MXA415D has a 15" overall length and equipped with a flexible top gooseneck section for optimal placement.
Features:
- 15-inch gooseneck
- Low-profile dual cardioid capsule design
- Single-flex gooseneck provides optimal mic adjustment
- Mounts on table, lectern, podium or similar surface
The MX415DUAL/C delivers redundant audio capture for applications that require premium results when failure isn’t an option. With a unique dual capsule design, every word is captured simultaneously by two cardioid cartridges, each to a separate output preamp – providing reliable multi-feed audio for a variety of applications.
All the details are captured
Low profile dual cartridge, dual-feed design ensures the signal gets through.
Everything Is Covered
A complete set of included accessories are included to meet a variety of placement needs – from lectern, to table, to podium.
Clean signal
Shure Commshield® technology is built into Microflex to reject RF interference from mobile devices, keeping focus on the speech.
| Cartridge Type | Electret Condenser |
| Frequency Response | 50Ð17000 Hz |
| Polar Pattern | Cardioid |
| Output Impedance | 180 ½ |
| Output Configuration | Active Balanced |
Sensitivity @ 1 kHz, open circuit voltage |
Ð35 dBV/Pa (18 mV) |
| Maximum SPL, 1 kHz at 1% THD, 1 k½ load | 124 dB |
| Self Noise, A-weighted | 28 dB SPL |
| Signal-to-Noise Ratio, Ref. 94 dB SPL at 1 kHz | 66 dB |
| Dynamic Range, 1 k½ load, @ 1 kHz | 96 dB |
| Common Mode Rejection, 10 Hz to 100 kHz | 45 dB, minimum |
| Clipping Level at 1% THD | -6 dBV |
| Polarity | Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector |
| Weight | 205 g (7.23 oz) |
| Operating Temperature | -18 Ð 57¡C (0 Ð 135¡F) |
| Storage Temperature | -29 Ð 74¡C (-20 Ð 165¡F) |
| Relative Humidity | 0 Ð 95% |
| Power Requirements | 11Ð52 V DC, 2.0 mA |
Your home for all things pro audio—backed by expertise and experience. Connect with us today.
Your home for all things pro audio—backed by expertise and experience. Connect with us today.
