Shure ULXD4 Wireless Receiver (H50 Band - 534-598 MHz)


Have a Question? Call Toll Free: 888-462-7828

Live Chat Email Us
Dale #:SHUR-ULXD4H50

Availability: Usually ships in 5 - 10 Days

This item usually ships within 5-10 days after your order is placed. Your payment will be charged after completing checkout.
Free Shipping (Continental US)
  • The Shure ULXD4 is a half-rack, networkable wireless receiver for use with ULX-D Wireless Systems. With an expansive set of professional features, including 24-bit / 48 kHz audio quality, efficient and intelligent RF performance, and AES 256-bit encryption, ULX offers uncompromising wireless tailored for professional sound reinforcement.


    • Predictive switching diversity
    • High Density mode optimizes ULX-D systems to simultaneously operate significantly more channels in applications up to 30 meters
    • Intelligent scanning automatically finds and deploys the cleanest frequencies to transmitters over IR sync
    • Interference detection and alerts provided on both the receiver and Wireless Workbench
    • Front panel gain adjustment buttons provide up to 60 dB additional gain
    • AES 256-bit encryption-enabled for applications where secure transmission is needed
      Ethernet networking provides streamlined setup across multiple receivers, Wireless Workbench 6 integration, and AMX/Crestron control
    • Support for frequency coordination with the Axient Spectrum Manager
    • Rugged metal chassis
    • Intuitive front panel LCD menu and controls with lockout feature
    • Upgraded LCD with adjustable contrast and brightness
    • Audio and RF LED meters with peak indicator
    • Remoteable 1/2 wave antennas
    • Furnished rack hardware
    Spurious Rejection>80 dB, typical
    Connector TypeBNC
    Impedance50 Ohms
    Bias Voltage12-13 V DC, 170 mA maximum, per antenna
    Gain Adjustment Range-18 to +42 dB in 1 dB steps (plus Mute setting)
    Configuration1/4" (6.35 mm): Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground)
    XLR: Balanced (1=ground, 2=audio +, 3=audio -)
    Impedance1/4" (6.35 mm): 100 Ohms (50 Ohms Unbalanced)
    XLR: 100 Ohms
    Full Scale Output1/4" (6.35 mm): +12 dBV
    XLR: LINE setting= +18 dBV, MIC setting= -12 dBV
    Mic / Line Switch30 dB pad
    Phantom Power Protection1/4" (6.35 mm): Yes
    XLR: Yes
    NETWORKINGPower Over Ethernet (PoE)
    No, protected
    Network InterfaceSingle Port Ethernet 10 / 100 Mbps
    Network Addressing CapabilityDHCP or Manual IP address
    Maximum Cable Length328 ft (100 m)
    ADDITIONAL SPECSAudio Frequency Response
    20 Hz-20 kHz, flat
    Dynamic Range120 dB, extended
    Tuning RangeUp to 64 MHz
    Dimensions7.75" x 6.75" x 1.65" (197 mm x 171 mm x 42 mm), H x W x D
    Weight2.0 lbs (913 g), without antennas
    HousingGalvanized steel
  • Shipping rates calculator