Shure ULXD4DGV - Dual-Channel Wireless Receiver (G57 Band - 470-608 MHz)
Availability:
Special Order ItemThis item is not stocked and needs to be ordered from the manufacturer. Please contact our sales team for more information.
Description
Dual-channel digital wireless receiver for use in demanding corporate, education, government, and performance environments. Wide 64 MHz tuning range, extensive antenna and spectrum options, and always-on AES-256 encryption. The Shure ULXD4D-GV is a dual-channel networkable wireless receiver for use with ULX-D¨ Digital Wireless Systems.
Features:
- Two receivers in a rugged 1RU metal chassis with internal power supply
- Danteª digital networked audio over Ethernet
- Bodypack frequency diversity ensures uninterrupted audio for mission-critical applications
- Individual gain controls, LED meters, and XLR outputs for each channel
- Up to 64 MHz tuning range (region dependent)
- Digital predictive switching diversity
- High Density mode allows higher channel counts at distances up to 100 ft / 30 m
- Optimized scanning finds, prioritizes, and deploys the cleanest frequencies to transmitters over IR sync
- Always-on AES-256 encryption for enhanced privacy in confidential settings
- Ethernet networking provides streamlined setup across multiple receivers, Wireless Workbench¨ integration, and AMX/Crestron control
- Yamaha¨ device ID allows simplified channel patching on CL consoles ("YAMAHA" is a registered trademark of Yamaha Corporation)
- Remote-mountable 1/2 wave antennas included
With 24-bit / 48 kHz digital audio for pristine sound quality, efficient RF transmission for maximum channel capacity in crowded spectrum, and always-on AES-256 encryption to protect confidential content, ULX-D delivers uncompromising wireless for the most demanding environments.
Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.
| RF Carrier Frequency Range | 470-534 MHz, varies by region (See Frequency Range and Ouput Power table) |
| Working Range | 100 m (330 ft) Note: Actual range depends on RF signal absorption, reflection and interference. |
| RF Tuning Step Size | 25 kHz, varies by region |
| Image Rejection | >70 dB, typical |
| RF Sensitivity | 98 dBm at 10-5 BER |
| Latency | <2.9 ms |
| RF Input | |
| Spurious Rejection | >80 dB, typical |
| Connector Type | BNC |
| Impedance | 50 |
| Bias Voltage | 12 to 13 V DC, 150 mA maximum, per antenna, switchable on/off |
| Cascade Output | |
| Connector Type | BNC |
| Note | For connection of one additional receiver in the same band |
| Configuration | Unbalanced, passive |
| Impedance | 50 |
| Insertion Loss | 0 dB |
| Audio Dynamic Range A-weighted, typical, System Gain @ +10 | XLR Analog Output>120 dB Dante Digital Output 130 dB |
| Total Harmonic Distortion | 12 dBFS input, System Gain @ +10 <0.1% |
| System Audio Polarity | Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (1/4-inch) output. |
| Operating Temperature Range | -18ÁC (0ÁF) to 50ÁC (122ÁF) Note: Battery characteristics may limit this range. |
| Storage Temperature Range | -29ÁC (-20ÁF) to 74ÁC (165ÁF) Note: Battery characteristics may limit this range. |
| Audio Output | |
| Gain Adjustment Range | 18 to +42 dB in 1 dB steps (plus Mute setting) |
| Configuration | XLR balanced (1=ground, 2=audio +, 3=audio ) |
| Impedance | 100 |
| Full Scale Output | LINE setting +18 dBV MIC setting 12 dBV |
| Mic/Line Switch | 30 dB pad |
| Phantom Power Protection | Yes |
| Networking | |
| Network Interface | Dual Port Ethernet 10/100 Mbps, 1Gbps, Dante Digital Audio |
| Network Addressing Capability | DHCP or Manual IP address |
| Maximum Cable Length | 100 m (328 ft) |
Dual-channel digital wireless receiver for use in demanding corporate, education, government, and performance environments. Wide 64 MHz tuning range, extensive antenna and spectrum options, and always-on AES-256 encryption. The Shure ULXD4D-GV is a dual-channel networkable wireless receiver for use with ULX-D¨ Digital Wireless Systems.
Features:
- Two receivers in a rugged 1RU metal chassis with internal power supply
- Danteª digital networked audio over Ethernet
- Bodypack frequency diversity ensures uninterrupted audio for mission-critical applications
- Individual gain controls, LED meters, and XLR outputs for each channel
- Up to 64 MHz tuning range (region dependent)
- Digital predictive switching diversity
- High Density mode allows higher channel counts at distances up to 100 ft / 30 m
- Optimized scanning finds, prioritizes, and deploys the cleanest frequencies to transmitters over IR sync
- Always-on AES-256 encryption for enhanced privacy in confidential settings
- Ethernet networking provides streamlined setup across multiple receivers, Wireless Workbench¨ integration, and AMX/Crestron control
- Yamaha¨ device ID allows simplified channel patching on CL consoles ("YAMAHA" is a registered trademark of Yamaha Corporation)
- Remote-mountable 1/2 wave antennas included
With 24-bit / 48 kHz digital audio for pristine sound quality, efficient RF transmission for maximum channel capacity in crowded spectrum, and always-on AES-256 encryption to protect confidential content, ULX-D delivers uncompromising wireless for the most demanding environments.
Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.
| RF Carrier Frequency Range | 470-534 MHz, varies by region (See Frequency Range and Ouput Power table) |
| Working Range | 100 m (330 ft) Note: Actual range depends on RF signal absorption, reflection and interference. |
| RF Tuning Step Size | 25 kHz, varies by region |
| Image Rejection | >70 dB, typical |
| RF Sensitivity | 98 dBm at 10-5 BER |
| Latency | <2.9 ms |
| RF Input | |
| Spurious Rejection | >80 dB, typical |
| Connector Type | BNC |
| Impedance | 50 |
| Bias Voltage | 12 to 13 V DC, 150 mA maximum, per antenna, switchable on/off |
| Cascade Output | |
| Connector Type | BNC |
| Note | For connection of one additional receiver in the same band |
| Configuration | Unbalanced, passive |
| Impedance | 50 |
| Insertion Loss | 0 dB |
| Audio Dynamic Range A-weighted, typical, System Gain @ +10 | XLR Analog Output>120 dB Dante Digital Output 130 dB |
| Total Harmonic Distortion | 12 dBFS input, System Gain @ +10 <0.1% |
| System Audio Polarity | Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (1/4-inch) output. |
| Operating Temperature Range | -18ÁC (0ÁF) to 50ÁC (122ÁF) Note: Battery characteristics may limit this range. |
| Storage Temperature Range | -29ÁC (-20ÁF) to 74ÁC (165ÁF) Note: Battery characteristics may limit this range. |
| Audio Output | |
| Gain Adjustment Range | 18 to +42 dB in 1 dB steps (plus Mute setting) |
| Configuration | XLR balanced (1=ground, 2=audio +, 3=audio ) |
| Impedance | 100 |
| Full Scale Output | LINE setting +18 dBV MIC setting 12 dBV |
| Mic/Line Switch | 30 dB pad |
| Phantom Power Protection | Yes |
| Networking | |
| Network Interface | Dual Port Ethernet 10/100 Mbps, 1Gbps, Dante Digital Audio |
| Network Addressing Capability | DHCP or Manual IP address |
| Maximum Cable Length | 100 m (328 ft) |
Your home for all things pro audio—backed by expertise and experience. Connect with us today.
Your home for all things pro audio—backed by expertise and experience. Connect with us today.
