
Description
The C80 is a uni-directional condenser microphone suitable for vocal/voice recording. Inheriting the microphone capsule used in the C-100 and using the same material as the C-800G for the diaphragm, this microphone inherits the essence of the predecessors. The dual diaphragm configuration suppresses sound characteristics changes with distance (proximity effect), enabling stable recording/distribution. "Noise Elimination Construction" succeeded from C-800G/C-100 prevents acoustic vibration resulting in low noise and clear sound.
Features:
-
Excellent Sound Quality
A powerful and rich mid-low frequency range provides vocals and voice recordings with a core sound and presence. -
Dual Diaphragm Configuration
The dual diaphragm configuration realizes stable recording/distribution by suppressing sound characteristic changes with distance (proximity effect). -
Noise Elimination Construction
The two-part metallic body structure succeeded from the C-800G/C-100 microphone prevents acoustic vibration, resulting in low noise and clear sound. -
Low-Cut Filter
The low-Cut filter switch helps eliminate the low-frequency noise and proximity effect. -
Pad Switch
A -10dB pad switch on the microphone provides added headroom and minimizes distortion caused by transient peaks.
Audio Section | |
Capsule Type | Condenser Microphone |
Frequency Response | 20Hz_20kHz |
Directivity | Uni-directional |
Sensitivity | -30 dB (deviation ±3 dB) (0 dB=1 V/Pa, 1 kHz) |
Output Impedance | 90½±15%, Balanced |
Dynamic Range | More than 125.5 dB |
Signal-to-Noise Ratio | 81.5dB |
Inherent Noise | Less than 12.5 dB SPL (0 dB=2 _ 10-5 Pa) (IEC* 61672-1 A-Weighted, 1 kHz, 1 Pa) |
Maximum Input Sound Pressure Level | More than 138 dB SPL (output level for 1% waveform distortion at 1 kHz, converted into equivalent input sound pressure level: 0 dB=2 _ 10-5 Pa) |
General Section | |
Connector | XLR-3-12C (male) |
Mic Cable | XLR 3-pin Cable Required (Not Supplied) |
Power Requirements | DC 44 to 52 V Phantom Power |
Dimensions | Approx. 40 mm (1.57 in.) dia. _ 158 mm (6.22 in.) |
Mass | Approx. 215 g (7.6 oz) |
Supplied Accessories | Cradle suspension (1) Operating instructions (1) Carrying case (1) |
The C80 is a uni-directional condenser microphone suitable for vocal/voice recording. Inheriting the microphone capsule used in the C-100 and using the same material as the C-800G for the diaphragm, this microphone inherits the essence of the predecessors. The dual diaphragm configuration suppresses sound characteristics changes with distance (proximity effect), enabling stable recording/distribution. "Noise Elimination Construction" succeeded from C-800G/C-100 prevents acoustic vibration resulting in low noise and clear sound.
Features:
-
Excellent Sound Quality
A powerful and rich mid-low frequency range provides vocals and voice recordings with a core sound and presence. -
Dual Diaphragm Configuration
The dual diaphragm configuration realizes stable recording/distribution by suppressing sound characteristic changes with distance (proximity effect). -
Noise Elimination Construction
The two-part metallic body structure succeeded from the C-800G/C-100 microphone prevents acoustic vibration, resulting in low noise and clear sound. -
Low-Cut Filter
The low-Cut filter switch helps eliminate the low-frequency noise and proximity effect. -
Pad Switch
A -10dB pad switch on the microphone provides added headroom and minimizes distortion caused by transient peaks.
Audio Section | |
Capsule Type | Condenser Microphone |
Frequency Response | 20Hz_20kHz |
Directivity | Uni-directional |
Sensitivity | -30 dB (deviation ±3 dB) (0 dB=1 V/Pa, 1 kHz) |
Output Impedance | 90½±15%, Balanced |
Dynamic Range | More than 125.5 dB |
Signal-to-Noise Ratio | 81.5dB |
Inherent Noise | Less than 12.5 dB SPL (0 dB=2 _ 10-5 Pa) (IEC* 61672-1 A-Weighted, 1 kHz, 1 Pa) |
Maximum Input Sound Pressure Level | More than 138 dB SPL (output level for 1% waveform distortion at 1 kHz, converted into equivalent input sound pressure level: 0 dB=2 _ 10-5 Pa) |
General Section | |
Connector | XLR-3-12C (male) |
Mic Cable | XLR 3-pin Cable Required (Not Supplied) |
Power Requirements | DC 44 to 52 V Phantom Power |
Dimensions | Approx. 40 mm (1.57 in.) dia. _ 158 mm (6.22 in.) |
Mass | Approx. 215 g (7.6 oz) |
Supplied Accessories | Cradle suspension (1) Operating instructions (1) Carrying case (1) |
We are your source for all your pro audio needs, delivered by experts. Call us today.
We are your source for all your pro audio needs, delivered by experts. Call us today.