
Description
The Avantone "Cabernet (C-series)" mics are designed to offer true professional performance at an absolutely unbeatable price. Featuring high grade Polystyrene and Metalized Polypropylene capacitors in the audio path as well as a proprietary single backplate 34mm 6 micron capsule, the CK6+ has the component set that is normally attributed to modded or hot rodded microphones.
A new larger capsule coupled with a transformer less circuit allows an incredibly airy open top end with a solid low end, making the CK6+ the most versatile microphone at its price point.
Milled from a single piece solid brass, the body of the CK6+ was designed to give the microphone a solid feel and the included custom retro shock mount prevents unwanted vibrations from traveling up into the microphone. The CK6+ has separate -10 dB pad & 80 Hz LF roll off switches.... The -10dB attenuation switch can be engaged when miking very high SPL sources to keep from overloading the electronics.
The 80Hz high-pass filter switch can be engaged to reduce rumble and to keep unwanted low frequencies from "muddying up" the track. All of these features come together to give you a fully professional microphone and a completely unbeatable value.
Uses Include: Studio vocals, acoustic guitar, mandolin, drum overheads, piano, etc
Standard Items Supplied:
- Avantone CK-6 Cardioid FET Microphone
- Avantone Custom Retro Shockmount
- Elegant padded genuine wooden Mic box
- Padded Aluminum storage / travel case
- Owners Manual
Type | True Transformerless Condenser |
Polar Pattern | Cardioid |
Capsule | 32mm 6 Micron Single Backplate Custom Designed Capsule |
Frequency Response | 35-20,000 Hz +/- 3.5dB |
Output Impedance | <=200 Ohms |
Maximum SPL | 136dB (0.5% THD @1000Hz) |
Equivalent Noise Level | <17dB |
Output Connector | Male XLR 3-pin |
High-Pass Switch | 80 Hz 6dB/octave |
Attenuation Switch | -10 dB |
Power Requirement | Standard 48 Volt Phantom / 5mA |
Included Accessories | Shockmount Wooden Box in Metal Carrying Case |
Dimensions | 155mm x 46mm |
Weight | .4 kg / .9 lb |
Finish | Polished Nickel trim / Metallic Cabernet Red Body |
The Avantone "Cabernet (C-series)" mics are designed to offer true professional performance at an absolutely unbeatable price. Featuring high grade Polystyrene and Metalized Polypropylene capacitors in the audio path as well as a proprietary single backplate 34mm 6 micron capsule, the CK6+ has the component set that is normally attributed to modded or hot rodded microphones.
A new larger capsule coupled with a transformer less circuit allows an incredibly airy open top end with a solid low end, making the CK6+ the most versatile microphone at its price point.
Milled from a single piece solid brass, the body of the CK6+ was designed to give the microphone a solid feel and the included custom retro shock mount prevents unwanted vibrations from traveling up into the microphone. The CK6+ has separate -10 dB pad & 80 Hz LF roll off switches.... The -10dB attenuation switch can be engaged when miking very high SPL sources to keep from overloading the electronics.
The 80Hz high-pass filter switch can be engaged to reduce rumble and to keep unwanted low frequencies from "muddying up" the track. All of these features come together to give you a fully professional microphone and a completely unbeatable value.
Uses Include: Studio vocals, acoustic guitar, mandolin, drum overheads, piano, etc
Standard Items Supplied:
- Avantone CK-6 Cardioid FET Microphone
- Avantone Custom Retro Shockmount
- Elegant padded genuine wooden Mic box
- Padded Aluminum storage / travel case
- Owners Manual
Type | True Transformerless Condenser |
Polar Pattern | Cardioid |
Capsule | 32mm 6 Micron Single Backplate Custom Designed Capsule |
Frequency Response | 35-20,000 Hz +/- 3.5dB |
Output Impedance | <=200 Ohms |
Maximum SPL | 136dB (0.5% THD @1000Hz) |
Equivalent Noise Level | <17dB |
Output Connector | Male XLR 3-pin |
High-Pass Switch | 80 Hz 6dB/octave |
Attenuation Switch | -10 dB |
Power Requirement | Standard 48 Volt Phantom / 5mA |
Included Accessories | Shockmount Wooden Box in Metal Carrying Case |
Dimensions | 155mm x 46mm |
Weight | .4 kg / .9 lb |
Finish | Polished Nickel trim / Metallic Cabernet Red Body |
Your home for all things pro audio—backed by expertise and experience. Connect with us today.
Your home for all things pro audio—backed by expertise and experience. Connect with us today.