Description
Priced individually, but sold in pairs.
Only 3.4 inches (86 mm) in depth, the DX-IC4LP solves space problems that competing products cannot. Suitable for paging, background music, or to augment larger systems, the DX-IC4LP is a versatile performer. It installs quickly and provides exceptionally uniform coverage with excellent sonic properties.
Uniform voicing among the Desono DX product family makes for an easy match to the other models in the series, while a host of design innovations set the DX family of loudspeakers apart from other products in its size and price range. Featuring genuine coaxial design with separate magnets for the LF and HF drivers, the DX-IC4LP exhibits reduced distortion and industry-leading sensitivity permitting 3dB to 6dB greater output level, while requiring half the amplification power of competing products.
Features:
- High intelligibility with exceptional uniform coverage
- Fast installation with SpringLockª mounting clamps
- Consistent, wide dispersion up to 16 kHz
- Shallow depth to fit into confined ceiling spaces
- Conduit knock-outs on the input cover meet plenum air space handling requirements
Operating Mode | Passive with DSP |
Operating Environment | Indoor |
Operating Range (-10dB) | 90 Hz to 18.5 kHz |
Nominal Beamwidth (H x V) | 130 deg., conical |
Transducers | LF 1 x 4.5" (114_mm) HF 1 x 0.75" (19_mm) exit compression driver |
Sensitivity | 92_dB (2.83_V) 92_dB (1W at rated impedance 8 ohm) |
Nominal Continuous Power Handling | 22_V (60W @ 8_ ohm) |
Nominal Maximum SPL | Peak 116_dB Continuous 110_dB |
Autoformer | 70V: 30_W, 15_W, 7.5_W, 3.75_W 100V: 30_W, 15_W, 7.5_W |
Recommended Amplifiers | 60W - 120W @ 8_ ohm, (22V - 31V) |
Crossover Frequency | 2 kHz |
Required Accessory | 90 Hz Electronic high pass filter |
Input Connection | 4-position Euroblock connector |
Controls | Front-face wattage / low impedance selector switch |
Mounting Provisions | 2 SpringLock mounting clamps with 3-inch grip range |
Certifications | ETL listed to comply with UL1480, UL2043 and CSA62368-1 Suitable for use in air handling spaces per NFPA 70 and NFPA 90 |
Dimensions W x D | 258 mm x 97 mm (10.16 x 3.81") |
Weight | TBD |
Finish | Back Can: Black, Matte finish Steel Face: Reflex loaded UL 94V-0 rated ABS plastic, paintable Black finish. |
Grille | Powder-coated perforated steel backed with color-matched woven fabric with safety line. White finish. |
Cutout Diameter | 222 mm (8.75") |
Accessories (included) | C-Ring supporting plate, tile support bridge rails, grille, paint mask, cut-out template, flat screwdriver |
Accessories (optional) | New Construction Brackets (SPA-NC300) Trim Rings (SPA-TR300) Black Grilles (SPA-GRB200) High Humidity Grilles (SPA-GHH200) 48" Tile Rails (SPA-RAIL48) Plenum-rated Dual-RJ45 Adapter (SPA-CCA200) |
Priced individually, but sold in pairs.
Only 3.4 inches (86 mm) in depth, the DX-IC4LP solves space problems that competing products cannot. Suitable for paging, background music, or to augment larger systems, the DX-IC4LP is a versatile performer. It installs quickly and provides exceptionally uniform coverage with excellent sonic properties.
Uniform voicing among the Desono DX product family makes for an easy match to the other models in the series, while a host of design innovations set the DX family of loudspeakers apart from other products in its size and price range. Featuring genuine coaxial design with separate magnets for the LF and HF drivers, the DX-IC4LP exhibits reduced distortion and industry-leading sensitivity permitting 3dB to 6dB greater output level, while requiring half the amplification power of competing products.
Features:
- High intelligibility with exceptional uniform coverage
- Fast installation with SpringLockª mounting clamps
- Consistent, wide dispersion up to 16 kHz
- Shallow depth to fit into confined ceiling spaces
- Conduit knock-outs on the input cover meet plenum air space handling requirements
Operating Mode | Passive with DSP |
Operating Environment | Indoor |
Operating Range (-10dB) | 90 Hz to 18.5 kHz |
Nominal Beamwidth (H x V) | 130 deg., conical |
Transducers | LF 1 x 4.5" (114_mm) HF 1 x 0.75" (19_mm) exit compression driver |
Sensitivity | 92_dB (2.83_V) 92_dB (1W at rated impedance 8 ohm) |
Nominal Continuous Power Handling | 22_V (60W @ 8_ ohm) |
Nominal Maximum SPL | Peak 116_dB Continuous 110_dB |
Autoformer | 70V: 30_W, 15_W, 7.5_W, 3.75_W 100V: 30_W, 15_W, 7.5_W |
Recommended Amplifiers | 60W - 120W @ 8_ ohm, (22V - 31V) |
Crossover Frequency | 2 kHz |
Required Accessory | 90 Hz Electronic high pass filter |
Input Connection | 4-position Euroblock connector |
Controls | Front-face wattage / low impedance selector switch |
Mounting Provisions | 2 SpringLock mounting clamps with 3-inch grip range |
Certifications | ETL listed to comply with UL1480, UL2043 and CSA62368-1 Suitable for use in air handling spaces per NFPA 70 and NFPA 90 |
Dimensions W x D | 258 mm x 97 mm (10.16 x 3.81") |
Weight | TBD |
Finish | Back Can: Black, Matte finish Steel Face: Reflex loaded UL 94V-0 rated ABS plastic, paintable Black finish. |
Grille | Powder-coated perforated steel backed with color-matched woven fabric with safety line. White finish. |
Cutout Diameter | 222 mm (8.75") |
Accessories (included) | C-Ring supporting plate, tile support bridge rails, grille, paint mask, cut-out template, flat screwdriver |
Accessories (optional) | New Construction Brackets (SPA-NC300) Trim Rings (SPA-TR300) Black Grilles (SPA-GRB200) High Humidity Grilles (SPA-GHH200) 48" Tile Rails (SPA-RAIL48) Plenum-rated Dual-RJ45 Adapter (SPA-CCA200) |
We are your source for all your pro audio needs, delivered by experts. Call us today.
We are your source for all your pro audio needs, delivered by experts. Call us today.