Dale #:
BOSE-8134031310Availability:
Not in Stock - Reserve YoursThis item is not in stock and needs to be ordered from the manufacturer. Your payment will be charged after completing checkout. We will strive to ship as soon as possible, pending availability.
Description
Put the power where you need it. PowerShare amplifiers deliver outstanding audio performance and reliability with patented technologies inherited from the field-proven PowerMatch line - now with added flexibility. Using innovative PowerShare technology, the amp shares power across all output chan... Read MoreSuggested Accessories
Description
Put the power where you need it. PowerShare amplifiers deliver outstanding audio performance and reliability with patented technologies inherited from the field-proven PowerMatch line - now with added flexibility. Using innovative PowerShare technology, the amp shares power across all output channels and delivers 600 watts for installed applications. This means you can distribute the total 600 watts asymmetrically across all outputs or use any individual output to deliver full power. And with support for both low- and high-impedance loads up to 100V, it's easy to adapt PowerShare amplifiers to a wide range of applications. ControlSpace Designer software allows for Ethernet-based configuration and quick setup of external control options. With onboard Dante® audio networking, you have the flexibility to place PowerShare amplifiers away from source locations and closer to loudspeakers. This unique set of features and technologies makes PowerShare one of the most versatile, high-performance amplifiers available today.
Features:
More +
Product Specs
POWER RATING | |
Amplifier Power | 4 x 150 W (THD+N < 0.04%, 1 kHz, 4-8 Ω, 70/100V) |
Maximum Power per Channel | 600 W @ 4-8 Ω, 70/100V |
Gain (Low-Z mode) | 32.0 dB |
Gain (70V mode) | 35.0 dB |
Gain (100V mode) | 38.0 dB |
AUDIO PERFORMANCE | |
Frequency Response | 4-8 Ω: 20 Hz – 20 kHz (+/- 0.5 dB @ 1 W); 70/100V: Same as 4-8 Ω with 50 Hz high-pass filter |
Channel Separation (Crosstalk) | > 85 dB @ 1 kHz, > 65 dB @ 20 kHz |
Signal to Noise Ratio | 100 dB (at rated power, A-weighted) |
AUDIO INPUTS | |
ANALOG | Input Channels 4 balanced Connectors 12-pin Euroblock Input Impedance 20 kΩ Maximum Input Level 20 dBu (at 12 dBu sensitivity setting) Sensitivity 4 / 12 dBu (low / high sensitivity) |
DANTE | Input Channels 4 digital Connectors RJ-45 (primary) |
AUDIO OUTPUTS | |
ANALOG | Outputs 4 Connectors 8-pin inverted Euroblock |
INTEGRATED DSP | |
A/D and D/A Converters | 24-bit / 48 kHz |
Processing Functions | Matrix mixer, loudspeaker EQ, real-time 9-band PEQ, Vpeak/Vrms limiters, delay, band pass, mute/output polarity inversion |
Audio Latency | < 1 ms (Analog input to analog loudspeaker output) |
INDICATORS AND CONTROLS | |
Power LED | Solid green: Power is on. Blinking green: Unit is in standby mode. Solid amber: Thermal fault. Solid red: Supply fault. |
Input Signal LED | Green: Signal present. Amber: Input is near clipping. Red: Input is clipping. Solid red: Indicates a fault. |
Output Limit LED | Amber: Amplifier limiting an output. Blinking red: Amplifier muted. Solid red: Indicates a fault. |
Controls, Front Panel | Power On/Off |
Controls, Rear Panel | Output attenuators |
ELECTRICAL | |
Mains Voltage | 100 VAC – 240 VAC (±10%, 50/60 Hz) |
AC Power Consumption | 120 VAC: 14 W (Standby), 500 W (Max) 230 VAC: 14 W (Standby), 500 W (Max) |
Mains Connector | Standard IEC (C14) |
Maximum Inrush Current | 14.14 A (230 VAC / 50 Hz), 8.04 A (120 VAC / 60 Hz) |
Protections | High temperature, output short, extra high frequency (EHF), excessively low or high AC line voltage |
PHYSICAL | |
Dimensions (H x W x D) | 44 mm x 483 mm x 414 mm (1.7 in x 19.0 in x 16.3 in) |
Shipping Weight | 7.8 kg (17.2 lb) |
Net Weight | 6.4 kg (14.1 lb) |
Cooling System | Microprocessor controlled, variable speed fans, left to right air flow |
GENERAL | |
Inputs (Control) | Mute input control |
More +
Also Popular
Talk To Our Sales Professionals:
888-462-7828
148-04 95th Ave
Jamaica, NY 11435
Monday - Friday 9:30am - 5:30pm EST
(closed Saturday/Sunday)
Questions or concerns about your order?
Info
Resources
Payment Options
© 2024 Dale Pro Audio. All Rights Reserved.
Dale Pro Audio is not responsible for technical inaccuracies, typographical errors, or incomplete or inaccurate content on this site. Prices and specifications subject to change without notice.