Bose PowerSpace P2600A Installation Power Amplifier
Availability:
In StockAvailable for shipment within one business day, or pickup from our Jamaica, NY warehouse during regular business hours.
Description
Ideal for zone-expansion applications, Bose PowerSpace amplifiers enhance any premium commercial sound installation with clean, reliable power - and digital connectivity. A Bose AmpLink input allows for multiple channels of uncompressed, low-latency digital audio from Bose DSPs via a single Cat 5 cable. The PowerSpace P2600A provides 600 watts per channel and features versatile outputs that give you the flexibility to deliver full channel power to either low- or high-impedance loads - without bridging - and even send double power to a single zone. For premium commercial applications, Bose PowerSpace amplifiers provide the power and performance to get the job done - pure and simple.
Features:
- 600 watts per channel and compatible with Bose loudspeakers, DSPs, and controls to create complete commercial sound systems
- Bose AmpLink input for simplified multichannel digital audio connection to compatible DSPs, reducing terminations and related points of failure
- Load-independent outputs deliver full channel power to either low-impedance (4-8 ohm) or high-impedance (70/100V) loads without bridging
- I-Share output delivers 2x power level by combining the current of both channels
- Auto-standby mode saves power when audio signal falls below a set threshold, then wakes when audio returns
Applications:
- Retail stores
- Restaurants and bars
- Hospitality venues
- Conference centers
- Schools
- Auxiliary zones
| POWER RATING | |
| Amplifier Power | 2x 600 W (THD+N < 0.04%, 1 kHz, 4-8 ohm, 70/100V) |
| I-Share Mode Power | 1x 1200 W (2-4 ohm, 70/100V) |
| Gain (Low-Z mode) | 35 dB |
| Gain (70V mode) | 35 dB |
| Gain (100V mode) | 38 dB |
| AUDIO PERFORMANCE | |
| Frequency Response | 4-8 ohm: 20 Hz - 20 kHz (+/- 1 dB @ 1 W); 70/100V: Same as 4-8 ohm with 50 Hz high-pass filter |
| Channel Separation (Crosstalk) | > 80 dB @ 1 kHz,> 65 dB @ 20 kHz |
| Dynamic Range | ? 100 dBA (at rated power) |
| Audio Latency | < 1 ms (any analog or AmpLink input to loudspeaker output) |
| AUDIO INPUTS | |
| Input Channels | Analog: 2 balanced AmpLink: 8 digital |
| Connectors | Analog: 6-pin Euroblock AmpLink: RJ-45 (Input) |
| Input Impedance | 10 kohm |
| Maximum Input Level | 22 dBu (at 14 dBu sensitivity setting) |
| Sensitivity | -10 dBV / 4dBu / 14 dBu |
| AUDIO OUTPUTS | |
| Outputs | Speaker: 2 AmpLink: 8 digital |
| Connectors | Speaker: 4-terminal block AmpLink: RJ-45 (Thru) |
| INDICATORS AND CONTROLS | |
| Power LED | Solid white: Power is on. Blinking white: Unit is in auto standby mode. Solid red: Power supply fault. Blinking Red: Thermal fault. |
| Input Signal LED | Green: Signal present. Amber: Input is near clipping. Red: Input is clipping. |
| Output Limit LED | Amber: Amplifier limiting an output. Blinking red: Amplifier muted. Solid red: Amplifier or thermal fault. |
| Controls, Front Panel | Power On/Off |
| Controls, Rear Panel | Amplifier mode DIP switches, input sensitivity switch, input select dial, mute, output attenuators. |
| ELECTRICAL | |
| Mains Voltage | 100 VAC - 240 VAC (±10%, 50/60 Hz) |
| AC Power Consumption | 120 VAC: 25 W (Auto standby), 570 W (Max) 230 VAC: 25 W (Auto standby), 570 W (Max) |
| Mains Connector | Standard IEC (C14) |
| Protections | Vpeak/Vrms limiters, high temperature, output short, extra high frequency (EHF), excessively low or high AC line voltage |
| PHYSICAL | |
| Operational Temperature | Range 0 deg.C to 40 deg.C |
| Storage Temperature Range | -40 deg.C to 70 deg.C |
| Dimensions (H x W x D) | 44 x 483 x 420 mm (1.7 x 19.0 x 16.5 in) |
| Net Weight | 6.2 kg (13.7 lb) |
| Shipping Weight | 8.2 kg (18.1 lb) |
| Cooling System | Microprocessor-controlled variable-speed fans, front-to-back air flow |
Ideal for zone-expansion applications, Bose PowerSpace amplifiers enhance any premium commercial sound installation with clean, reliable power - and digital connectivity. A Bose AmpLink input allows for multiple channels of uncompressed, low-latency digital audio from Bose DSPs via a single Cat 5 cable. The PowerSpace P2600A provides 600 watts per channel and features versatile outputs that give you the flexibility to deliver full channel power to either low- or high-impedance loads - without bridging - and even send double power to a single zone. For premium commercial applications, Bose PowerSpace amplifiers provide the power and performance to get the job done - pure and simple.
Features:
- 600 watts per channel and compatible with Bose loudspeakers, DSPs, and controls to create complete commercial sound systems
- Bose AmpLink input for simplified multichannel digital audio connection to compatible DSPs, reducing terminations and related points of failure
- Load-independent outputs deliver full channel power to either low-impedance (4-8 ohm) or high-impedance (70/100V) loads without bridging
- I-Share output delivers 2x power level by combining the current of both channels
- Auto-standby mode saves power when audio signal falls below a set threshold, then wakes when audio returns
Applications:
- Retail stores
- Restaurants and bars
- Hospitality venues
- Conference centers
- Schools
- Auxiliary zones
| POWER RATING | |
| Amplifier Power | 2x 600 W (THD+N < 0.04%, 1 kHz, 4-8 ohm, 70/100V) |
| I-Share Mode Power | 1x 1200 W (2-4 ohm, 70/100V) |
| Gain (Low-Z mode) | 35 dB |
| Gain (70V mode) | 35 dB |
| Gain (100V mode) | 38 dB |
| AUDIO PERFORMANCE | |
| Frequency Response | 4-8 ohm: 20 Hz - 20 kHz (+/- 1 dB @ 1 W); 70/100V: Same as 4-8 ohm with 50 Hz high-pass filter |
| Channel Separation (Crosstalk) | > 80 dB @ 1 kHz,> 65 dB @ 20 kHz |
| Dynamic Range | ? 100 dBA (at rated power) |
| Audio Latency | < 1 ms (any analog or AmpLink input to loudspeaker output) |
| AUDIO INPUTS | |
| Input Channels | Analog: 2 balanced AmpLink: 8 digital |
| Connectors | Analog: 6-pin Euroblock AmpLink: RJ-45 (Input) |
| Input Impedance | 10 kohm |
| Maximum Input Level | 22 dBu (at 14 dBu sensitivity setting) |
| Sensitivity | -10 dBV / 4dBu / 14 dBu |
| AUDIO OUTPUTS | |
| Outputs | Speaker: 2 AmpLink: 8 digital |
| Connectors | Speaker: 4-terminal block AmpLink: RJ-45 (Thru) |
| INDICATORS AND CONTROLS | |
| Power LED | Solid white: Power is on. Blinking white: Unit is in auto standby mode. Solid red: Power supply fault. Blinking Red: Thermal fault. |
| Input Signal LED | Green: Signal present. Amber: Input is near clipping. Red: Input is clipping. |
| Output Limit LED | Amber: Amplifier limiting an output. Blinking red: Amplifier muted. Solid red: Amplifier or thermal fault. |
| Controls, Front Panel | Power On/Off |
| Controls, Rear Panel | Amplifier mode DIP switches, input sensitivity switch, input select dial, mute, output attenuators. |
| ELECTRICAL | |
| Mains Voltage | 100 VAC - 240 VAC (±10%, 50/60 Hz) |
| AC Power Consumption | 120 VAC: 25 W (Auto standby), 570 W (Max) 230 VAC: 25 W (Auto standby), 570 W (Max) |
| Mains Connector | Standard IEC (C14) |
| Protections | Vpeak/Vrms limiters, high temperature, output short, extra high frequency (EHF), excessively low or high AC line voltage |
| PHYSICAL | |
| Operational Temperature | Range 0 deg.C to 40 deg.C |
| Storage Temperature Range | -40 deg.C to 70 deg.C |
| Dimensions (H x W x D) | 44 x 483 x 420 mm (1.7 x 19.0 x 16.5 in) |
| Net Weight | 6.2 kg (13.7 lb) |
| Shipping Weight | 8.2 kg (18.1 lb) |
| Cooling System | Microprocessor-controlled variable-speed fans, front-to-back air flow |
We are your source for all your pro audio needs, delivered by experts. Call us today.
We are your source for all your pro audio needs, delivered by experts. Call us today.
