Crown DCI 8|600DA DriveCore Install Dante 8-Channel Power Amplifier
Availability:
Special Order ItemThis item is not stocked and needs to be ordered from the manufacturer. Please contact our sales team for more information.
Description
The DriveCore Install DA series is a line of premium installation amplifiers with Dante™ networked audio transport that are based upon proprietary DriveCore technology. These amplifiers feature an efficient design with network control/monitoring, high-level DSP with JBL tunings, and 2 ohm/4 ohm/8 ohm/70V/100V direct output compatibility.
INTEGRATED DANTE™NETWORKED AUDIO - Simplifies installation by enabling Dante networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers.
NETWORK CONFIGURATION, MONITORING & CONTROL - Better monitoring, control and audio manipulation with the HiQnet™ protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers.
PROGRAMMABLE GENERAL PURPOSE INPUT/OUTPUT PORT - GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system.
DIGITAL SIGNAL PROCESSING - DSP capabilities include the following:
- LevelMAX Limiters
- Input/Output EQ
- Crossover
- Delay
- Matrix Router
- Speaker Line Monitoring
| Power Rating | |
| Dual Mode - All Channels Driven | 2 ohms: 300W |
| Bridge Mono Mode - All Channels Driven | 4 ohms: 600W 8 ohms: 1200W 16 ohms: 1200W 140v RMS: 1200W 200v RMS: 1200W |
| Redundant, independent Dante ports | ¥ Primary / Secondary ¥ Will accept 48khz or 96khz ¥ Capable of sending out Dante audio from analog inputs pre/post processing (@ 48kHz) |
| Unique Features | - Audio Architect Control and Monitoring - DriveCore Amplifier Technology - Universal PFC Power Supply |
| DSP | ¥ 48kHz processing ¥ 20 Presets |
| Input router | ¥ High, medium, and low priority inputs ¥ Input delay up to 2s ¥ Input EQ ¥ Crossover |
| Output options | ¥ Output EQ ¥ Output Delay up to 100ms ¥ LevelMAX limiter ¥ Load Monitoring |
| Pilot tone | ¥ Normal ¥ Burst |
| Other | - Continuous Load Monitoring - Sweep Load Monitoring ¥ Channel Auto-Standby ¥ Speaker Tunings - Aux-Port ¥ Sleep contact closure ¥ Amp Status output - Removable air filters - Front panel LED indicators |
The DriveCore Install DA series is a line of premium installation amplifiers with Dante™ networked audio transport that are based upon proprietary DriveCore technology. These amplifiers feature an efficient design with network control/monitoring, high-level DSP with JBL tunings, and 2 ohm/4 ohm/8 ohm/70V/100V direct output compatibility.
INTEGRATED DANTE™NETWORKED AUDIO - Simplifies installation by enabling Dante networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers.
NETWORK CONFIGURATION, MONITORING & CONTROL - Better monitoring, control and audio manipulation with the HiQnet™ protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers.
PROGRAMMABLE GENERAL PURPOSE INPUT/OUTPUT PORT - GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system.
DIGITAL SIGNAL PROCESSING - DSP capabilities include the following:
- LevelMAX Limiters
- Input/Output EQ
- Crossover
- Delay
- Matrix Router
- Speaker Line Monitoring
| Power Rating | |
| Dual Mode - All Channels Driven | 2 ohms: 300W |
| Bridge Mono Mode - All Channels Driven | 4 ohms: 600W 8 ohms: 1200W 16 ohms: 1200W 140v RMS: 1200W 200v RMS: 1200W |
| Redundant, independent Dante ports | ¥ Primary / Secondary ¥ Will accept 48khz or 96khz ¥ Capable of sending out Dante audio from analog inputs pre/post processing (@ 48kHz) |
| Unique Features | - Audio Architect Control and Monitoring - DriveCore Amplifier Technology - Universal PFC Power Supply |
| DSP | ¥ 48kHz processing ¥ 20 Presets |
| Input router | ¥ High, medium, and low priority inputs ¥ Input delay up to 2s ¥ Input EQ ¥ Crossover |
| Output options | ¥ Output EQ ¥ Output Delay up to 100ms ¥ LevelMAX limiter ¥ Load Monitoring |
| Pilot tone | ¥ Normal ¥ Burst |
| Other | - Continuous Load Monitoring - Sweep Load Monitoring ¥ Channel Auto-Standby ¥ Speaker Tunings - Aux-Port ¥ Sleep contact closure ¥ Amp Status output - Removable air filters - Front panel LED indicators |
We are your source for all your pro audio needs, delivered by experts. Call us today.
We are your source for all your pro audio needs, delivered by experts. Call us today.
