Contact Our Expert Sales Team:
888-462-7828Dale #:
CROW-XTI1002Availability:
Not in Stock - Reserve YoursThis item is not in stock and needs to be ordered from the manufacturer. Your payment will be charged after completing checkout. We will strive to ship as soon as possible, pending availability.
Description
There's no debate - when you choose Crown's XTi 1002, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night witho... Read MoreRetail Price: $1,402.02 Our Price: $709.00
Shipping Charges Apply
Suggested Accessories
Description
There's no debate - when you choose Crown's XTi 1002, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat.
With such innovations as a universal tracking switch-mode power supply and a fully integrated suite of speaker processing tools, these amps are at the top of their class when it comes to thermal efficiency and system flexibility.
XTi 1002:
Features:
More +
Product Specs
INTEGRATED PROCESSING | |
Input EQ | 6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed. |
Crossover Filters | Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per Octave. Also includes ± 15 dB bandpass gain and polarity control. |
Output EQ | 8 parametric filters per channel with adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be bypassed. |
Delay | For signal alignment of driver; 50 mS of total delay. |
SubHarmonic Synth | Takes the low-frequency content of the input signal and "synthesizes" a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. New: Users now have control over frequency, gain, and filter type. |
Peakx™ Plus Limiter | User defeatable limiter that allows users to control Threshold, Attack, and Release times. |
Presets | 50 total presets, 49 of which are user-definable. |
PERFORMANCE | |
Sensitivity (for full rated power at 4 ohms) | 1.4 Vrms |
Frequency Response (at 1 watt, 20 Hz - 20 kHz) | +0 dB, –1 dB |
Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms) | 100 dB (A weighted) |
Total Harmonic Distortion (THD) | < 0.5% |
Damping Factor 20 Hz to 1 kHz | > 500 |
Crosstalk (below rated power) | 20 kHz - 1 kHz: > 70 db |
Input Impedance (nominal) | 20k ohms balanced, 10k ohms unbalanced |
Maximum Input Signal | +22 dBu typical |
AC Line Voltage and Frequency Configurations | 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz |
AC Line Current (120 VAC amplifier playing 1/8 power pink noise into 4 ohms per ch) | 6.8A; no more than 38W at idle |
CONTROLS | |
Level | Two front-panel rotary level controls, one for each channel |
Power Switch | On/Off switch applies AC power to the amplifier |
Sel/Prev/Next Buttons | Three buttons near the LCD screen that are used to access menu items and front panel lockout |
LCD Screen | Backlit liquid crystal display that shows preset and processing status |
INDICATORS | |
Signal Indicator | Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs). |
–10 Indicator | Green LED flashes when output signal exceeds -10 dB below clip. |
–20 Indicator | Green LED flashes when output signal level exceeds -20 dB below clip. |
Ready Indicator | Green LED, one per channel, illuminates when the amplifier is ready to produce audio. |
Clip Indicator | Red LED, one per channel, turns on at the threshold of audible distortion |
Temp Indicator | Red LED, one per channel, illuminates under excessive temperature conditions |
Power Indicator | Blue LED illuminates when the amplifier has been turned on and has power |
INPUT/OUTPUT CONNECTORS | |
Input Connectors | XLR, one per channel |
Link/Out Connector | Loop-thru signal from input connector for linking another amplifier, one per channel. |
Output Connectors | Two Neutrik® Speakon® NL4MP output connectors. Channel-1 Speakon® is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon® connectors). |
HiQnet™ USB Connector | Type B, connects to HiQnet™ network. |
CONSTRUCTION | |
Chassis | Steel |
Front Panel | Cast-aluminum |
Cooling | Proportional speed fan with front-to-rear airflow. |
Dimensions | 19" (W) x 3.5" (H) x 12.25" (D) |
Net Weight | 18.5 lbs (8.4kg) |
Shipping Weight | 21.5 lbs (9.8kg) |
More +
Also Popular
Talk To Our Sales Professionals:
888-462-7828
148-04 95th Ave
Jamaica, NY 11435
Monday - Friday 9:30am - 5:30pm EST
(closed Saturday/Sunday)
Questions or concerns about your order?
Info
Resources
Payment Options
© 2024 Dale Pro Audio. All Rights Reserved.
Dale Pro Audio is not responsible for technical inaccuracies, typographical errors, or incomplete or inaccurate content on this site. Prices and specifications subject to change without notice.