DPA Microphones BC4099 - Acoustic Bass Mounting Clip for 4099 Microphone
Availability:
Special Order ItemThis item is not stocked and needs to be ordered from the manufacturer. Please contact our sales team for more information.
Description
Clip to connect a DPA 4099 Instrument Microphone to an acoustic upright bass. There are several excellent placement possibilities on the instrument.
The microphone and its mounting system are both designed and optimized for the double bass. This ensures that the best mounting and audio reinforcement is achieved when performing live. The mic attaches to the E- and G-string below the bridge. This ensures mic placement in the sweet spot between the bridge and fingerboard.
The versatile gooseneck provides stable and repeatable positioning. The mics can be easily unclipped and repositioned or moved to another instrument. The mounting system is designed to never blemish or scratch the finish of your instrument. The flexible design supports a wide variety of mounting and positioning possibilities.
| Directional characteristics | Supercardioid |
| Principle of operation | Pressure gradient |
| Cartridge type | Pre-polarized condenser |
| Frequency range | 20 Hz to 20 kHz |
| Frequency range, ± 2 dB, 20 cm (7.9 in) distance | 80 Hz to 15 kHz with 2 dB soft boost at 10 to 12 kHz |
| Sensitivity, nominal, ±3 dB | 6 mV/Pa; -44.5 dB re. 1 V/Pa |
| Equivalent noise level, A-weighted | Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A)) |
| S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL) | 71 dB |
| Total harmonic distortion (THD) | < 1 % up to 123 dB SPL peak; < 1 % up to 120 dB SPL RMS sine |
| Dynamic range | 100 dB |
| Max. SPL, peak before clipping | 142 dB |
| Output impedance | From MicroDot: 30 to 40 ohm, from DAD6001: 100 ohm |
| Cable drive capability | 300 m (984 ft) with DAD6001 |
| Output balance principle | Signal balanced with DAD6001 XLR adapter |
| Common Mode Rejection Ratio (CMRR) | > 60 dB at 50 Hz to 15 kHz with DAD6001 XLR adapter |
| Power supply | Min. 5 V to max. 50 V through DPA adapter for wireless systems; 48 V phantom power ±4 V with DAD6001 XLR adapter |
| Current consumption | 1.5 mA; 3.5 mA with DAD6001 XLR adapter |
| Connector | MicroDot |
| Color | Black |
| Weight | 33 g (1.16 oz) |
| Microphone length | 45 mm (1.8 in) |
| Cable length | 1.8 m (6 ft) |
| Polarity | Positively increasing sound pressure produces positive going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter) |
| Operating temperature range | -40 ¡C to 45 ¡C (-40 ¡F to 113 ¡F) |
| Relative humidity | Up to 90 % |
| Gooseneck, length | 140 mm (5.5 in) |
Clip to connect a DPA 4099 Instrument Microphone to an acoustic upright bass. There are several excellent placement possibilities on the instrument.
The microphone and its mounting system are both designed and optimized for the double bass. This ensures that the best mounting and audio reinforcement is achieved when performing live. The mic attaches to the E- and G-string below the bridge. This ensures mic placement in the sweet spot between the bridge and fingerboard.
The versatile gooseneck provides stable and repeatable positioning. The mics can be easily unclipped and repositioned or moved to another instrument. The mounting system is designed to never blemish or scratch the finish of your instrument. The flexible design supports a wide variety of mounting and positioning possibilities.
| Directional characteristics | Supercardioid |
| Principle of operation | Pressure gradient |
| Cartridge type | Pre-polarized condenser |
| Frequency range | 20 Hz to 20 kHz |
| Frequency range, ± 2 dB, 20 cm (7.9 in) distance | 80 Hz to 15 kHz with 2 dB soft boost at 10 to 12 kHz |
| Sensitivity, nominal, ±3 dB | 6 mV/Pa; -44.5 dB re. 1 V/Pa |
| Equivalent noise level, A-weighted | Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A)) |
| S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL) | 71 dB |
| Total harmonic distortion (THD) | < 1 % up to 123 dB SPL peak; < 1 % up to 120 dB SPL RMS sine |
| Dynamic range | 100 dB |
| Max. SPL, peak before clipping | 142 dB |
| Output impedance | From MicroDot: 30 to 40 ohm, from DAD6001: 100 ohm |
| Cable drive capability | 300 m (984 ft) with DAD6001 |
| Output balance principle | Signal balanced with DAD6001 XLR adapter |
| Common Mode Rejection Ratio (CMRR) | > 60 dB at 50 Hz to 15 kHz with DAD6001 XLR adapter |
| Power supply | Min. 5 V to max. 50 V through DPA adapter for wireless systems; 48 V phantom power ±4 V with DAD6001 XLR adapter |
| Current consumption | 1.5 mA; 3.5 mA with DAD6001 XLR adapter |
| Connector | MicroDot |
| Color | Black |
| Weight | 33 g (1.16 oz) |
| Microphone length | 45 mm (1.8 in) |
| Cable length | 1.8 m (6 ft) |
| Polarity | Positively increasing sound pressure produces positive going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter) |
| Operating temperature range | -40 ¡C to 45 ¡C (-40 ¡F to 113 ¡F) |
| Relative humidity | Up to 90 % |
| Gooseneck, length | 140 mm (5.5 in) |
We are your source for all your pro audio needs, delivered by experts. Call us today.
We are your source for all your pro audio needs, delivered by experts. Call us today.
