Neumann SKM 184 NI Stereo Pair of KM 184 Condenser Microphones (Nickel)


Have a Question? Call Toll Free: 888-462-7828

Live Chat Email Us
Dale #:NEUM-SKM184NI_

Availability: In Stock

Available for immediate shipment and pick-up from our Jamaica, New York location. In-store pick-up is available Monday through Friday from 8:30 am to 5:30 pm
Free Shipping (Continental US)
  • The SKM184 NI Stereo Matched Microphone Pair is a kit containing a stereo matched pair of the KM 184 NI microphones. The microphones feature cardioid, pressure condenser elements intended for live sound reinforcement and broadcast as well as recording applications. The KM 180 series microphones feature an output stage based on the KM 100. Transformer less circuitry and balanced output result in high output gain with a very low noise floor and no coloration to the output signal. The KM 184 NI is powered via +48 Volt phantom power.


    • Cardioid Polar Pattern- The cardioid polar pattern minimizes room ambiance and noise caused by additional instruments, monitors, vocalists etc. The KM 184 is suitable for X,Y style stereo capturing, percussion, wind instruments, piano, leslie speaker, and guitar amplifiers.
    • KM 100 Based Output Stage- The KM 184 NI features the same output stage electronics as the KM 100. Transformer-less circuitry and quiet balanced output design ensure a clean, high-gain output signal without any coloration. The KM 184 is powered via +48 Volt phantom power, and its 20-20kHz frequency response provides flexibility for use in a wide range of recording situations. The KM 184 can handle sound pressure levels up to 138dB, allowing fairly close miking of instruments.
    • Compact Rugged Construction- The slim design and rugged construction allow easy microphone placement while remaining road worthy.
    • Nickel Finish- The nickel finish makes the microphone less conspicuous, thus making it a suitable microphone for television broadcast.

    The stereo pair are matched in sensitivity and frequency response and provide optimum results when capturing performances or ambiance. The 20Hz to 20kHz frequency response provides flexibility for use in a wide range of recording situations. The KM 184 MT's cardioid polar pattern provides a generous pick up area and is suitable for ambiance or spot miking instruments such as piano, wind instruments organ and choir. The KM 184 MT handles sound pressure levels up to 140dB allowing close miking of instruments high in transient (peak) level response.

  • Polar PatternCardioid
    Frequency Response20 Hz - 20 kHz
    Dynamic Range (Typical)122 dB
    Signal-to-Noise Ratio69 dB, Related at 1 Pa at 1 kHz (CCIR dB), 78 dB, Related at 1 Pa at 1 kHz (A-Weighted dB)
    Maximum Input Sound Level138 dB, Less than 0.5% THD
    Power RequirementsPhantom, 48v
    Output Impedance50 Ohms
    Output ConnectorsXLR-3M Type
    Low Frequency Roll-OffNone
    Dimensions4.28 x 0.88" (107 x 22mm) LxD
    Weight2.8 oz (80g)
  • Shipping rates calculator