Have a Question? Contact Us

888-462-7828 Live Chat

Radial Engineering Backtrack - Stereo Backing Track Source Switcher

  • Dale #:

    RADI-BACKTRACK
  • Availability:

    Sold Out
  • This item is not in stock and needs to be ordered from the manufacturer. Your payment will be charged after completing checkout. We will strive to ship as soon as possible, pending availability.

Description

The Backtrack™ is a compact stereo audio switcher, perfect for bands running redundant backing tracks on stage or switching between any stereo audio sources. Features: Switch between two stereo backing track sources on stage Easily connect playback devices with ¼” and 3.5mm TRS jacks ... Read More

Free Shipping (Continental US)

Have a Question?

Call Toll Free: 888-462-7828 Live Chat Email Us

Suggested Accessories

Description

The Backtrack™ is a compact stereo audio switcher, perfect for bands running redundant backing tracks on stage or switching between any stereo audio sources.

Features:

  • Switch between two stereo backing track sources on stage
  • Easily connect playback devices with ¼” and 3.5mm TRS jacks
  • Headphone output for silently cueing up tracks
  • Transformer isolated main outputs eliminate hum and buzz


Protect against playback failure
For any performance that incorporates backing tracks or other pre-recorded elements, reliability is crucial to ensuring a smooth performance. Unfortunately, smartphone batteries die, laptops freeze up, and Murphy's Law will always apply. The Backtrack creates a redundant system to ensure that you can instantly switch over to a backup device should any problems arise with your primary playback source. This can be accomplished easily with the push of a button on the Backtrack or via a remote JR-2 footswitch, giving you peace of mind and freeing you up to focus on your performance without worry.

Switch backing track sources remotely
Use the JR-2 footswitch to mute or switch between playback sources. Monitor on stage with a powered speaker while simultaneously sending signal to the house PA system.

Use the headphone output to cue up tracks
The headphone output can listen to either input without switching the feed to the PA, allowing you to cue the next track and monitor silently on headphones.

Switch between redundant amp modeling systems
Take the balanced or unbalanced line-level outputs of two stereo amp modeling devices into the Backtrack; it will automatically balance the signal at the XLR outputs to the PA. Should one amp simulator go down, use the JR-2 to easily switch to the backup unit.

More +

Product Specs

Audio circuit type: Passive Audio Circuit with Active Headphone Amplifier
Number of channels: 2
Frequency response: 20Hz - 20kHz (-0.5dB/+0.5dB)
Dynamic range: >+130dBu
Total harmonic distortion: 0.007% @ 0dBu, 1kHz
Intermodulation Distortion: 0.02% @ 0dBu, 1kHz
Common Mode Rejection Ratio: 34dBu @ 60Hz, 42dBu @ 3kHz
Noise: -105dBu
Maximum Input: >+25dBu
Features
Ground lift, Headphone
Input Connectors: 1/4" TRS, 3.5mm, RCA
Output Connectors: XLR, 1/4" TRS
Extras: Headphone output
General
Construction: 14-gauge steel chassis
Size (L x W x D): 4.6" x 5.9" x 1.9" (11.7 x 15 x 4.8cm)
Weight: 2.2 lb (1kg)
Shipping size (L x W x D): 11.7" x 4.75" x 2.5" (29.7 x 12 x 6.4cm)
Shipping weight: 3.25 lb (1.5kg)
Power: 15VDC 100mA
Conditions: For use in dry locations only between 5°C and 40°C
Warranty: Radial 3-year, transferable

More +

Shipping Rate Calculator

 

Also Popular