RDL ST-RG1 Ramp Generator - 0 to 10 Vdc Output

 

Please Note: requires PS-24AS Power Supply (sold separately)

Have a Question? Call Toll Free: 888-462-7828

Live Chat Email Us
Dale #:RDL-STRG1

Availability: Usually ships in 5 - 10 Days

This item usually ships within 5-10 days after your order is placed. Your payment will be charged after completing checkout.
Free Shipping (Continental US)
  • The ST-RG1 is a digitally generated 0 to 10 volt Ramp Generator which provides the ideal interface for audio volume control from multiple points with the ST-VCA2. Any number of Up and Down buttons may be connected to the ST-RG1. Sufficient drive is provided from the ST-RG1 to control up to six ST-VCA2s.
    Features include:

      VCAs may be controlled from several locations with the optional RLC2 Remote Level Control panel or RUC-4 Universal Remote. LED level indicator driver circuitry is included in the ST-RG1 for visual indication of relative level.
      Features:
    • Ramp Generator with 0 to 10 Volt Output
    • Remote Control of ST-VCA2 modules
    • Multiple VCA Remote Control Points
    • Pushbutton Up / Down Ramp Control
    • Dual LED Outputs for Position Indication
    • Ramp Output Capable of Driving Six VCAs
    • Buffered, De-Bounced Switch Inputs
  • Control Inputs:1 to ramp up, 1 to ramp down
    Input Logic:External closure pulls normally low input to +15 Vdc to activate UP or DOWNfunction
    Indicator Outputs:1 to drive red LED (partial to fully OFF)
    1 to drive green LED (partial to fully ON)
    LED Output Current:0 to 3 mA (to drive low current, high intensity LEDs)
    Ramp Output:0 to 10 volts nominal, (typical < 0.1 V to > 9.8 V under ST-VCA2 load)
    Minimum Step:200 mV nominal
    Ramp Time:5 seconds nominal (fully off to fully on or fully on to fully off)
    Power Requirement:GROUND-REFERENCED, 24 to 33 Vdc @ 40 mA
    Ambient Operating Environment:0 degrees C to 55 degrees C
  • Shipping rates calculator