Contact Our Expert Sales Team:

888-462-7828

Shure ULXD4 Wireless Receiver (G50 Band - 470-534 MHz)

 
  • Dale #:

    SHUR-ULXD4G50
  • Availability:

    In Stock
  • Available for immediate shipment or pick-up from our Jamaica, NY warehouse. In-store pick-up is available Monday through Friday 8:30 am to 5:30 pm.

Description

The Shure ULXD4 is a half-rack, networkable wireless receiver for use with ULX-D Wireless Systems. With an expansive set of professional features, including 24-bit / 48 kHz audio quality, efficient and intelligent RF performance, and AES 256-bit encryption, ULX offers uncompromising wireless tail... Read More

Free Shipping (Continental US)

Have a Question?

Call Toll Free: 888-462-7828 Live Chat Email Us

Suggested Accessories

Description

The Shure ULXD4 is a half-rack, networkable wireless receiver for use with ULX-D Wireless Systems. With an expansive set of professional features, including 24-bit / 48 kHz audio quality, efficient and intelligent RF performance, and AES 256-bit encryption, ULX offers uncompromising wireless tailored for professional sound reinforcement.

Features

  • Predictive switching diversity
  • High Density mode optimizes ULX-D systems to simultaneously operate significantly more channels in applications up to 30 meters
  • Intelligent scanning automatically finds and deploys the cleanest frequencies to transmitters over IR sync
  • Interference detection and alerts provided on both the receiver and Wireless Workbench
  • Front panel gain adjustment buttons provide up to 60 dB additional gain
  • AES 256-bit encryption-enabled for applications where secure transmission is needed
    Ethernet networking provides streamlined setup across multiple receivers, Wireless Workbench 6 integration, and AMX/Crestron control
  • Support for frequency coordination with the Axient Spectrum Manager
  • Rugged metal chassis
  • Intuitive front panel LCD menu and controls with lockout feature
  • Upgraded LCD with adjustable contrast and brightness
  • Audio and RF LED meters with peak indicator
  • Remoteable 1/2 wave antennas
  • Furnished rack hardware

More +

Product Specs

RF INPUT
Spurious Rejection>80 dB, typical
Connector TypeBNC
Impedance50 Ohms
Bias Voltage12-13 V DC, 170 mA maximum, per antenna
AUDIO OUTPUT 
Gain Adjustment Range-18 to +42 dB in 1 dB steps (plus Mute setting)
Configuration1/4" (6.35 mm): Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground)
XLR: Balanced (1=ground, 2=audio +, 3=audio -)
Impedance1/4" (6.35 mm): 100 Ohms (50 Ohms Unbalanced)
XLR: 100 Ohms
Full Scale Output1/4" (6.35 mm): +12 dBV
XLR: LINE setting= +18 dBV, MIC setting= -12 dBV
Mic / Line Switch30 dB pad
Phantom Power Protection1/4" (6.35 mm): Yes
XLR: Yes
NETWORKINGPower Over Ethernet (PoE)
No, protected
Network InterfaceSingle Port Ethernet 10 / 100 Mbps
Network Addressing CapabilityDHCP or Manual IP address
Maximum Cable Length328 ft (100 m)
ADDITIONAL SPECSAudio Frequency Response
20 Hz-20 kHz, flat
Dynamic Range120 dB, extended
Tuning RangeUp to 64 MHz
Dimensions7.75" x 6.75" x 1.65" (197 mm x 171 mm x 42 mm), H x W x D
Weight2.0 lbs (913 g), without antennas
HousingGalvanized steel

More +

Shipping Rate Calculator

 

Also Popular