Suggested Accessories
Description
The Sonifex AVN-PXH12 is a monitor-mixer primarily designed for monitoring Audio Over IP audio channels in a compact 1U format rack. Any AES67 audio channels on your network can be assigned to input channels on the unit and mixed down to analogue outputs, a headphone output and built-in speaker.
It is a stereo monitoring device that allows you to monitor up to 12 audio sources, from an input total of 24, at any one time. The 24 audio sources can be selected from 4 discrete stereo analogue audio inputs (1 x front panel 3.5mm jack socket, 2 x rear panel 3.5mm jack sockets and 1 x rear panel stereo XLR input pair) or from any RAVENNA, AES67 or AES67-enabled Dante® AoIP connected streams.
These stereo signals are routed to the 12 x control channels on the front panel, each of which have a 'Normal' and an 'Alternate' input selection. Each channel has three buttons: one for input selection, another to Mute the channel and the third to select whether the channel input is routed to the left, right or stereo output legs.
The knob for each channel controls the level of the input routed to the output and the knob also illuminates either green, amber or red to show input level. Pressing the knob 'Solos' the channel input to the output.
Front panel LEDs show the AoIP network status, synchronisation status and the status of the AC and DC power supply inputs.
The front panel has 3 outputs: paralleled stereo headphones on 6.35mm ( 1/4") jack and 3.5mm jack sockets, each with their own individual attenuation settings, and a mono-mix speaker output. There are discrete volume controls for the headphones and the speaker, and the latter also has a mute button.
The rear panel has an additional 3 line level XLR-3 audio outputs, which can be designated as mono mix or left or right channel outputs of the mixed audio content (similar to the speaker and headphone outputs respectively), or any of the physical inputs or AoIP input sources.
The unit also sends to the network, as AoIP AES67 streams, the 8 channels of the 4 physical stereo inputs, together with a stereo mix of the speaker output.
The unit can act as a PTP masterclock or slave clock and supports IEEE1588-2008 PTPv2 media and default profiles.
The rear panel contains IEC mains and secondary DC power inputs which provide power redundancy to the product. There are two Ethernet RJ45 connections (control and AoIP) and there is an Ethernet SFP module that, when used, replaces the AoIP RJ45 connection.
A rear panel GPIO connector provides 10 local ports which can be user configured as inputs or outputs and provide software controlled functionality. A voltage free relay contact can be used to operate external equipment.
A built-in web server provides complete configuration control of the unit including source assignment to each channel and also allows for firmware updates and configuration backup. The unit can be controlled by suitable Ember+ commands.
Features:
More +
Product Specs
Audio-Over-IP Specification | |
Open Standards: | RAVENNA, AES67 |
Device Discovery: | Bonjour (mDNS / DNS-SD) & SAP |
Audio Delivery: | RTP/UDP over IPv4 multicast |
QoS: | DiffServ |
Stream Management: | RTSP/SDP |
Control: | Ember+/webserver |
Format: | Linear PCM 24-bit (L24) |
Channels Per Stream: | Maximum of 8 |
Frames Per Packet: | 48 |
Maximum Streams: | RX 15, TX 2 |
Sample Rate: | 48 kHz |
Timing Synchronisation | |
Profile Support: | Default, media & custom profiles |
Timing Protocol: | PTPv2, IEEE1588-2008 |
Technical Specification | |
Unbalanced Line Inputs | |
Input Impedance: | >20kΩ |
0dBFS Line-Up: | +12dBu |
Frequency Response: | 20Hz to 20kHz, +0/-0.2dB |
THD+N: | <-97dBFS, -30dBFS, 20Hz to 20kHz, unity gain, 20kHz BW |
Noise: | -100dBFS, 20kHz BW, Rs=200Ω |
Crosstalk: | <-97dB |
Balanced Line Inputs | |
Input Impedance: | >20kΩ balanced |
0dBFS Line-Up: | Adjustable +15/+18/+20/+22/ +24dBu |
Frequency Response: | 20Hz to 20kHz, +0/-0.2dB |
THD+N: | <-110dBFS, -30dBFS, 20Hz to 20kHz, 20kHz BW |
Noise: | -110dBFS, 20kHz BW, Rs=200Ω |
Crosstalk: | <-100dB |
Common Mode Rejection: | >70dB @ 1kHz |
Headphone Output | |
Output Impedance: | Drives 150mW into 32Ω to 600Ω headphones |
0dBFS Line-Up: | +20dBu |
Frequency Response: | 20Hz to 20kHz, +0/-0.2dB |
THD+N: | <-108dBFS, -30dBFS, 20Hz to 20kHz, unity gain, 20kHz BW |
Noise: | -110dBFS, 20kHz BW |
Balanced Line Outputs | |
Output Impedance: | <50Ω balanced |
0dBFS Line-Up: | Adjustable +15/+18/+20/+22/ +24dBu |
Frequency Response: | 20Hz to 20kHz, +0/-0.2dB |
THD+N: | <-110dBFS, -30dBFS, 20Hz to 20kHz, 20kHz BW |
Noise: | -110dBFS, 20kHz BW, Rs=200Ω |
Loudspeaker | |
Power Output: | 4W |
Volume: | Mute to full volume via front panel control |
Connections | |
Headphone: | ¼ inch (6.35mm) stereo jack socket 3.5mm stereo jack socket |
Audio Inputs: | 3 x unbalanced 3.5mm stereo jack socket 2 x balanced XLR-3 female socket |
Audio Outputs: | 3 x balanced XLR-3 male plug 1 x loudspeaker output |
GPIO: | 15-way ‘D’-type socket |
Network: | 2 x gigabit Ethernet, RJ45 |
1 x SFP fibre | |
Mains AC Input: | Universal filtered IEC, continuously rated 85-264VAC, 47-63Hz, 20W |
DC Input: | 4 pin 7.5A power jack socket, 9.5-14VDC |
Fuse Rating: | Anti-surge fuse 2A 20mm x 5mm |
Equipment Type | |
AVN-PXH12: | 2 x 12 Channel mix monitor, AoIP portal |
Physical Specification | |
Dimensions: (Raw) | 48.3cm (W) x 20.12cm (D) x 4.4cm (H)(1U) 19” (W) x 7.92” (D) x 1.8” (H) (1U) |
Dimensions (Boxed): | 55.2cm (W) x 29.5cm (D) x 16.5cm (H) 21.7" (W) x 11.6" (D) x 6.5" (H) |
Weight: | Nett: 2.9kg Gross: 3.5kg Nett: 6.38lbs Gross: 7.7lbs |
Accessories | |
AVN-DC-060: | 60W DC power supply with KPJX-4S plug |
More +
Also Popular