Wisycom BFL-T2-M2-D1 - Double RF Over Fiber Transmitter
Please Note: Orders will not be available for shipment until on or about Wednesday August, 19.
Wisycom BFL-T2-M2-D1 - Double RF Over Fiber Transmitter
Sale price$2,650.00
Regular price$2,945.00
Description
BFL-T2/BFL-R2 is a double RF over Fiber module with selectable filters and remote control interface.
BFL-T2 is equipped with two optical laser which transforms an RF signal to an optical signal.
BFL-R2 is equipped with two photodiode which transforms an optical signal to an RFsignal.
Both the models can work in
- IFB mode: to send low power IFB/IEM signal over fiber to a remote area
- ANT mode: to receive signal from an antenna placed on a remote area
FEATURES:
- Wide RF band: 170-1260 MHz
- Easy configuration thru an high contrast OLED white display and 4 key navigation buttons
- Monitor and control through Ethernet, Bluetooth and LoRa
- Operating voltage range: 9 ÷ 18 Vdc
- 2 RGB LEDs for system status indication
- 6mW optical laser to cover miles away
- Remote control of Wisycom antennas (LFA, ADFA and BFA)
- 20 band pass filters and 40 Mhz tunable filter software selectable to increase RF robustness
- Compatible with expansion board EXP3 (code: BFL-T2_M0-D1)
| Frequency ranges | 170÷1260 MHz |
| RF Connector | BNC (N on request) |
| Antenna booster (BFL-T2) | +12Vdc, 220 mA max, compatible with Wisycom active antennas (LFA, ADFA, BFA, LBNA2) +12Vdc, 450 mA max (option HB), compatible with the most widely used RF downconverters |
| Tunable Filter | 470 ÷ 758 MHz (UHF), 40MHz of bandwidth, 1 MHz step tuning |
| Fixed Filter | 820-832MHz, 733-758MHz, 940-960 MHz (for Europe, USA and UK) |
| Selectable band pass filter | 17 RF filters selectable: HP: 170 MHz LP: 608/698/1160/1260 MHz HP: 470 MHz LP: 608/698/1160/1260 MHz HP: 518 MHz LP: 608/698/1160/1260 MHz HP: 566 MHz LP: 698/1160/1260 MHz HP: 960 MHz LP: 1160/1260 MHz |
| RF to fiber link working modes | ANT (for reception link), IFB (for tranmission link) |
| Optical Connector | SC/APC (LC/APC on request) for RFoF, LC/UPC for Data (remote control) NOTE: all fiber links (RFoF and Data control) require single mode fiber |
| Optical power (BFL-T2) | 6 mW / 4 mW selectable |
| Wavelength (BFL-T2) | 1510 nm for Channel A, 1550 nm for Channel B |
| Managing interface | Display menu and 4 buttons, Remote Control thru Wisycom Manager or Wisycom App |
| LEDs | 2 multicolour RGB LEDs to easy indicates BFL status (left for channel A, right for channel B): red: RF/optical overload blue: booster enabled green: link active, no alarm off: link disabled |
| Power supply | 9 ÷ 18 Vdc |
| Power Connector | Hirose 4pin (pin1: GND, pin4: Vdc) |
| Power consumption | 5,4 W typical, +1W with 2 Ethernet active, +1,5 W max for each active antenna booster (LFA) |
| Display | High contrast OLED white display (128 x 64 pixels) |
| Mounting | 4 holes (for M4 screw type) |
| Temperature range | -10 ÷ +50 °C |
| Dimensions | 105 mm(L) x 178 mm(H) x 42 mm(D) |
| Weight | 800 g approx. |
BFL-T2/BFL-R2 is a double RF over Fiber module with selectable filters and remote control interface.
BFL-T2 is equipped with two optical laser which transforms an RF signal to an optical signal.
BFL-R2 is equipped with two photodiode which transforms an optical signal to an RFsignal.
Both the models can work in
- IFB mode: to send low power IFB/IEM signal over fiber to a remote area
- ANT mode: to receive signal from an antenna placed on a remote area
FEATURES:
- Wide RF band: 170-1260 MHz
- Easy configuration thru an high contrast OLED white display and 4 key navigation buttons
- Monitor and control through Ethernet, Bluetooth and LoRa
- Operating voltage range: 9 ÷ 18 Vdc
- 2 RGB LEDs for system status indication
- 6mW optical laser to cover miles away
- Remote control of Wisycom antennas (LFA, ADFA and BFA)
- 20 band pass filters and 40 Mhz tunable filter software selectable to increase RF robustness
- Compatible with expansion board EXP3 (code: BFL-T2_M0-D1)
| Frequency ranges | 170÷1260 MHz |
| RF Connector | BNC (N on request) |
| Antenna booster (BFL-T2) | +12Vdc, 220 mA max, compatible with Wisycom active antennas (LFA, ADFA, BFA, LBNA2) +12Vdc, 450 mA max (option HB), compatible with the most widely used RF downconverters |
| Tunable Filter | 470 ÷ 758 MHz (UHF), 40MHz of bandwidth, 1 MHz step tuning |
| Fixed Filter | 820-832MHz, 733-758MHz, 940-960 MHz (for Europe, USA and UK) |
| Selectable band pass filter | 17 RF filters selectable: HP: 170 MHz LP: 608/698/1160/1260 MHz HP: 470 MHz LP: 608/698/1160/1260 MHz HP: 518 MHz LP: 608/698/1160/1260 MHz HP: 566 MHz LP: 698/1160/1260 MHz HP: 960 MHz LP: 1160/1260 MHz |
| RF to fiber link working modes | ANT (for reception link), IFB (for tranmission link) |
| Optical Connector | SC/APC (LC/APC on request) for RFoF, LC/UPC for Data (remote control) NOTE: all fiber links (RFoF and Data control) require single mode fiber |
| Optical power (BFL-T2) | 6 mW / 4 mW selectable |
| Wavelength (BFL-T2) | 1510 nm for Channel A, 1550 nm for Channel B |
| Managing interface | Display menu and 4 buttons, Remote Control thru Wisycom Manager or Wisycom App |
| LEDs | 2 multicolour RGB LEDs to easy indicates BFL status (left for channel A, right for channel B): red: RF/optical overload blue: booster enabled green: link active, no alarm off: link disabled |
| Power supply | 9 ÷ 18 Vdc |
| Power Connector | Hirose 4pin (pin1: GND, pin4: Vdc) |
| Power consumption | 5,4 W typical, +1W with 2 Ethernet active, +1,5 W max for each active antenna booster (LFA) |
| Display | High contrast OLED white display (128 x 64 pixels) |
| Mounting | 4 holes (for M4 screw type) |
| Temperature range | -10 ÷ +50 °C |
| Dimensions | 105 mm(L) x 178 mm(H) x 42 mm(D) |
| Weight | 800 g approx. |
Your home for all things pro audio—backed by expertise and experience. Connect with us today.
Your home for all things pro audio—backed by expertise and experience. Connect with us today.
