
Description
The EVID FM6.2 loudspeaker system from ElectroVoice is a complete two-way in-wall loudspeaker package. The package consists of a bezel assembly, grille, rear enclosure, 6.5 inch two-way loudspeaker coupled with a 6.5 inch passive radiator and an internal line-matching transformer. The loudspeaker features 6.5 inch low-frequency cone and hightemperature voice-coil assembly along with a 6.5 inch long excursion passive radiator and titanium coated dome tweeter.
The EVID FM6.2 loudspeaker utilizes a crossover network, centered at 3,300 Hz, that provides 16-dB-per-octave tweeter protection outside of its operating range. In addition the FM6.2 features a comprehensive protection circuit to shield the woofer and tweeter drivers from excessive power levels. The FM6.2 utilizes a transformer that offers a selection of 7.5, 15, 30, or 60 watts delivered to the loudspeaker system using either 70-V or 100-V lines. The wattage is selected via a convenient switch on the front baffle. The unit can also be operated as an 8-ohm speaker via the same front panel selector switch.
The perforated grille is finished in semi-gloss white powder-coated enamel. The baffle and bezel is constructed from heat resistant ABS. The rear enclosure is constructed from zinc-plated, steel. The rear enclosure provides an optimum internal volume, ensuring extended low-frequency performance. It is constructed from heavy-gauge, rugged steel. The steel rear enclosure was optimized using FEA to virtually eliminate panel resonance. The entire enclosure is less than 4 inches deep providing an easy installation into nearly any tight wall or ceiling space. A rear cover, with provisions for a junction box fitting, provides access to a 4-pin terminal block that allows direct connection to the speaker and provides pass through to additional speakers.
FM6.2 loudspeakers provide wide dispersion, high-efficiency, high-maximum output, ease of installation, and wide-range reproduction of music or voice.
Features:
- Shallow profile, ideal for tight wall or ceiling spaces
- Tuned passive radiator extends bass, enhances performance
- High quality 1-inch titanium dome tweeter
- Full-bandwidth overload protection
- 70 V, 100 V, and 8 ohms operation in the same model for off-the-shelf versatility
- Front-panel mode/wattage selector
- Fully-sealed enclosure provides superior isolation to protect adjacent rooms
- Secure Phoenix-style pass-through connectors for easy wiring and installation.
- Four point quick mounting tabs for fast attachment in any wall cavity
- Can-mounted transformer for enhanced rigidity
- Ribbed back can eliminates flexing
| Frequency Range (-10 dB) | 52 - 20000kHz | 
| Nominal Impedance (Passive) | 8½ | 
| HF Transducer | 1 inch Titanium dome tweeter | 
| Max. SPL/1m (calc)_ | 115dB | 
| Coverage (Nominal -6 dB) H | 120¡ | 
| LF Transducer | 6 inch with 6 inch passive radiator | 
| Coverage (Nominal -6 dB) V | 120¡ | 
| Power Rating | 300W | 
| System Power Handling (Continuous/Program/Peak) | 75//300Watts | 
| LF Power Handling | 6 inch, plus 6-inch passiveWatts | 
| HF Power Handling | 1-inch (Titanium dome)Watts | 
| Enclosure Material | Zinc Plated Metal | 
| Available Color | White | 
| Sensitivity 1 W/1 m | 90dB | 
| Height | 18.31" (465mm) | 
| Width | 10.08" (256mm) | 
| Depth | 3.95" (100.3mm) | 
| Weight Net | 12.79lbs (5.8kg) | 
| Transformer Taps (Transformer Version Only) | 7.5, 15, 30, 60 w at 70 v | 
| Input Connections | 4-pin Phoenix | 
The EVID FM6.2 loudspeaker system from ElectroVoice is a complete two-way in-wall loudspeaker package. The package consists of a bezel assembly, grille, rear enclosure, 6.5 inch two-way loudspeaker coupled with a 6.5 inch passive radiator and an internal line-matching transformer. The loudspeaker features 6.5 inch low-frequency cone and hightemperature voice-coil assembly along with a 6.5 inch long excursion passive radiator and titanium coated dome tweeter.
The EVID FM6.2 loudspeaker utilizes a crossover network, centered at 3,300 Hz, that provides 16-dB-per-octave tweeter protection outside of its operating range. In addition the FM6.2 features a comprehensive protection circuit to shield the woofer and tweeter drivers from excessive power levels. The FM6.2 utilizes a transformer that offers a selection of 7.5, 15, 30, or 60 watts delivered to the loudspeaker system using either 70-V or 100-V lines. The wattage is selected via a convenient switch on the front baffle. The unit can also be operated as an 8-ohm speaker via the same front panel selector switch.
The perforated grille is finished in semi-gloss white powder-coated enamel. The baffle and bezel is constructed from heat resistant ABS. The rear enclosure is constructed from zinc-plated, steel. The rear enclosure provides an optimum internal volume, ensuring extended low-frequency performance. It is constructed from heavy-gauge, rugged steel. The steel rear enclosure was optimized using FEA to virtually eliminate panel resonance. The entire enclosure is less than 4 inches deep providing an easy installation into nearly any tight wall or ceiling space. A rear cover, with provisions for a junction box fitting, provides access to a 4-pin terminal block that allows direct connection to the speaker and provides pass through to additional speakers.
FM6.2 loudspeakers provide wide dispersion, high-efficiency, high-maximum output, ease of installation, and wide-range reproduction of music or voice.
Features:
- Shallow profile, ideal for tight wall or ceiling spaces
- Tuned passive radiator extends bass, enhances performance
- High quality 1-inch titanium dome tweeter
- Full-bandwidth overload protection
- 70 V, 100 V, and 8 ohms operation in the same model for off-the-shelf versatility
- Front-panel mode/wattage selector
- Fully-sealed enclosure provides superior isolation to protect adjacent rooms
- Secure Phoenix-style pass-through connectors for easy wiring and installation.
- Four point quick mounting tabs for fast attachment in any wall cavity
- Can-mounted transformer for enhanced rigidity
- Ribbed back can eliminates flexing
| Frequency Range (-10 dB) | 52 - 20000kHz | 
| Nominal Impedance (Passive) | 8½ | 
| HF Transducer | 1 inch Titanium dome tweeter | 
| Max. SPL/1m (calc)_ | 115dB | 
| Coverage (Nominal -6 dB) H | 120¡ | 
| LF Transducer | 6 inch with 6 inch passive radiator | 
| Coverage (Nominal -6 dB) V | 120¡ | 
| Power Rating | 300W | 
| System Power Handling (Continuous/Program/Peak) | 75//300Watts | 
| LF Power Handling | 6 inch, plus 6-inch passiveWatts | 
| HF Power Handling | 1-inch (Titanium dome)Watts | 
| Enclosure Material | Zinc Plated Metal | 
| Available Color | White | 
| Sensitivity 1 W/1 m | 90dB | 
| Height | 18.31" (465mm) | 
| Width | 10.08" (256mm) | 
| Depth | 3.95" (100.3mm) | 
| Weight Net | 12.79lbs (5.8kg) | 
| Transformer Taps (Transformer Version Only) | 7.5, 15, 30, 60 w at 70 v | 
| Input Connections | 4-pin Phoenix | 
Your home for all things pro audio—backed by expertise and experience. Connect with us today.
Your home for all things pro audio—backed by expertise and experience. Connect with us today.

